Models
>
KGCC566RBL03
KGCC566RBL03 KitchenAid Cooktop - Overview
Sections of the KGCC566RBL03
[Viewing 2 of 2]Manuals & Care Guides for KGCC566RBL03
Click to downloadKeep searches simple, eg. "belt" or "pump".
Torx Screw
PartSelect #: PS11741257
Manufacturer #: WP3368921
7-18 x 3/4" - sold individually.
$6.54
In Stock
Knob Skirt - Black
PartSelect #: PS11731279
Manufacturer #: W10854242
The knob skirt or grommet on your range goes around the knob, forming a buffer between it and the range surface. If your knob skirt is damaged, you should consider replacing it. This product is approx...
$11.18
In Stock
Knob Skirt
PartSelect #: PS11740833
Manufacturer #: WP3180081
This white knob skirt is located between the glass top and the control knobs of your stove top. The skirt has an outside diameter of approximately 2 inches. The most common reasons to replace the time...
$11.07
In Stock
Screw, Igniter
PartSelect #: PS11745563
Manufacturer #: WP8273062
This screw is sold individually.
$7.84
In Stock
Surface Ignitor
PartSelect #: PS11747432
Manufacturer #: WP9782116
Also known as Spark Electrode. This part helps your burner ignite and produce flame.
$43.26
In Stock
Burner Knob
PartSelect #: PS11745701
Manufacturer #: WP8286094BL
Sold individually. This knob accepts a D-shaped shaft.
$25.01
In Stock
Range Screw
PartSelect #: PS11742550
Manufacturer #: WP4449809
Follow appropriate safety practices when installing your range screw. Sold individually.
$7.76
In Stock
Burner Head - 12K
PartSelect #: PS11754345
Manufacturer #: WPW10406797
This part distributes flame evenly to your cookware.
$49.23
In Stock
Igniter Switches with Harness
PartSelect #: PS11742674
Manufacturer #: WP4456901
This part includes 5 ignition switches and the wire harness. You can not purchase these separately.
$113.22
In Stock
Burner Head - 16K
PartSelect #: PS11754347
Manufacturer #: WPW10406878
This part distributes flame evenly to your cookware.
$57.62
In Stock
Burner Cap - Left Rear/Right Front - Coal Matte Black
PartSelect #: PS11745713
Manufacturer #: WP8286153CB
$49.43
In Stock
Questions And Answers for KGCC566RBL03
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the KGCC566RBL03
[Viewing 2 of 2]Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Igniter problem on one gas burner
I had to remove the two separate components of the gas burner unit, each had two screws. I lifted then tilted the lower portion of the burner unit to allow access to the underside of the igniter. I removed the wire and then with an offset screwdriver I removed the single screw that held the igniter in place. I reversed the steps to inst
... Read more
all the replacement, very quick fix.
I was also very pleased with how quickly the order was processed and the part was delivered, only three or four days with standard shipping.
I was also very pleased with how quickly the order was processed and the part was delivered, only three or four days with standard shipping.
Read less
Parts Used:
-
Roland from Houston, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
16 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I had a faulty wiring on the igniter switches.
replaced the set of igniter switches I order from Partselect .com.
Parts Used:
-
Raymundo from Cerritos, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
12 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
REPLACING burner head and ignitor
Remove the screw on the front of each side, also there are two screws holding the burner controls. Remove the burner knobs. There are two screws holding the burner head to the top of the burner panel, looking down on the burner head, these will not come out easily. Here's where the drill comes in. Drill the two screws head off, there are
... Read more
two gas line connections that must be removed, be careful not to twist the gas line. Remove the burner head and replace with the new one. When replacing the burner head, screw the gas line to the burner head first, then to the main gas control.
Read less
Parts Used:
-
Charles from ATLANTA, GA
-
Difficulty Level:Very Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers
6 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!