Models > KFP600WH > Instructions

KFP600WH KitchenAid Food Processor - Instructions

All installation instructions for KFP600WH parts

These instructions have been submitted by other PartSelect customers and can help guide you through the food processor repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the KFP600WH
1-15 of 57
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The lid to my food processor broke & I lost the disc support for the shredding discs

  • Customer: Diane from Fallbrook CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 13 of 14 people found this instruction helpful
The repair was easy as there was no need to use tools. The shocking part was that my order was received on the day after I ordered it. The prompt shipping was totally unexpected and I was happy that it woreked out so quickly.

Bowl Cover was broken

  • Customer: Manuel from Sun City AZ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 7 of 9 people found this instruction helpful
Replaced bowl cover with new bowl cover.

Replacement bowl cover for food processor

  • Customer: James from Lincoln MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 5 of 6 people found this instruction helpful
I own a great old Kitchenaid food processor. The bowl cover was no longer keeping food in. When I ground cheese, it would spew all over the place if I did not hold the cover down (which i would occassionally forget to do). I was considering purchasing a new food processor, when someone suggested that I try parts select. I was easily able to locate the correct part and for 20 bucks it's like new...saving me about 200.00.
Thank you PartsSelect!
Jim McMann

Broken plastic shaft on food processor.

  • Customer: David from Lewisville TX
  • Difficulty: Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers
  • 8 of 16 people found this instruction helpful
The old broken shaft sleeve did not want to come off. Had to cut it off with a Dremel. Once the old plastic shaft sleeve was off, the new shaft sleeve went on fairly easily. I believe that the shaft sleeve should be made out of aluminum rather than plastic. If that were the case it never would have broken the way the old one did.

My disc support, somehow turned up missing.

  • Customer: Ronald from York PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 4 people found this instruction helpful
I unpacked the part and slipped it in place. Took less than 5 minutes. I searched for over a month for this part and your site was the only one that carried a replacement for it.
My Kitchen aid food processor was a gift from my daughter more than 10 years ago and it is still going strong, thanks to this site. Thank you

broken bowl

  • Customer: Cathleen from Olympia WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 5 people found this instruction helpful
i placed the bowl in the proper place and twisted it shut. just like it was meant to be.

SLICING DISC

  • Customer: DOUGLAS from CINCINNATI OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 5 of 8 people found this instruction helpful
JUST DROPED DISC ON TO UNIT.

The mixer bowl needed replacing

  • Customer: Marci from South Bend IN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 4 people found this instruction helpful
Parts select staff were wonderful to work with. It took 4 months to get my mixer bowl; however, this was a problem with the manufacturer. Everytime I called par Select to question HOW LONG; WHEN; I got a warm and supportive person who helped me contact the manufacturer for an ETA. I finally have my bowl; I will use PartSelect in the future!

food processor bowl broken

  • Customer: Linda from Petersburg AK
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 7 people found this instruction helpful
repllaced the bowl

broken food processor bowl and cover

  • Customer: Greg from Pittsburgh PA
  • Difficulty: A Bit Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 8 people found this instruction helpful
Kitchenaid uses multi-piece plastic parts for their food processors. Over time, the seams start to come apart both on the bowl and cover allowing liquids to shoot out the gaps and make quite a mess.

replacing part in food processor

  • Customer: Ann from Tallahassee FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 2 people found this instruction helpful
We were really impressed with how quickly this part was shipped. We needed it fast, and it arrived fast. We will definitely come back to this seller whenever we need appliance parts.

Bowl cover broke on Food Processor, which actuates the Switch

  • Customer: William from Warrensburg MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 4 people found this instruction helpful
I contacted Kitchenaide, and they no longer carry parts, so I ordered from PartSelect and installed the new cover.,

I saved about $190, by repairing instead of purchasing a new Food Processor.

Threw the blade away by accident to the food processor

  • Customer: Joel from DEcatur GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 4 people found this instruction helpful
Put it in the bowl it fit perfectly, After we lost the orgianal blade my wife was ready to throw the whole food processor away. You saved me I figure $150.00

I lost the part that had control of the blades. It was very hard finding the right company that had the part. Thank goodness you resued me.

  • Customer: Norma from Jackson TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 4 people found this instruction helpful
Just put it in the processor.

Install Rubber foot

  • Customer: Dennis R from Winter Park FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 2 people found this instruction helpful
Simply remove worn foot by pulling up while wisting. Install new foot by inserting smaller diameter end into slot at base of appliance and pushing down until seated.
All Instructions for the KFP600WH
1-15 of 57