Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KFIS20XVMS7

KFIS20XVMS7 KitchenAid Refrigerator - Overview

Get Parts and Repair Help for KFIS20XVMS7

If you know the refrigerator repair part you need, you can browse the list of all parts on the KFIS20XVMS7, or you can search by name or part description. You can also find your part by where it is located on the KFIS20XVMS7 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for KFIS20XVMS7 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

Order within the next 4 hrs and your part ships today!
$26.11

P-Trap Drain Tube Kit

Also known as a duck bill. This kit includes the tube extension piece and spacer.

Order within the next 4 hrs and your part ships today!
$23.23

Light Switch

This part turns on the light when the door is opened.

Order within the next 4 hrs and your part ships today!
$7.20

Touch-Up Paint - White

18ml

Order within the next 4 hrs and your part ships today!
$96.98

Icemaker Motor Kit

This kit includes the module motor, ejector arm, and ice stripper arm. The complete icemaker is sold separately.

Order within the next 4 hrs and your part ships today!
$114.72

Door Gasket - Apollo Grey

This door gasket is used to make an air-tight seal for the cabinet when the door is closed.

Order within the next 4 hrs and your part ships today!
$19.34

Drawer Gear Kit

These parts will attach to your drawer rail and are used to help the drawer glide smoothly.

Order within the next 4 hrs and your part ships today!
$11.07

Spray Paint - 12 oz. - White

Order within the next 4 hrs and your part ships today!
$6.90

Stainless Steel Cleaner

Use this bottle of stainless steel cleaner and polish for any of your stainless steel appliances.

Order within the next 4 hrs and your part ships today!
$7.20

Touch-Up Paint - .6fl Ounce - Biscuit

Order within the next 4 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

light on to order water filter

  • Customer: Douglas from Byron, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 668 of 712 people found this instruction helpful
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute. read more

My refrigerator stopped cooling and the freezer section stopped freezing

  • Customer: garth from forest lake, MN
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 176 of 196 people found this instruction helpful
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot ... read more

Removing the existing filter by rotating as directed and then dislodging from 'docking' station proved difficult. Turns out, the old filter is under a bit of vacuum pressure and getting the unit to separate or release was a challenge.

  • Customer: Jake from Novato, CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 196 of 286 people found this instruction helpful
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady... read more