Models > KFGS366VSS02

KFGS366VSS02 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KFGS366VSS02

If you know the cooktop repair part you need, you can browse the list of all parts on the KFGS366VSS02, or you can search by name or part description. You can also find your part by where it is located on the KFGS366VSS02 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.82

SCREW

$21.24

Control Knob

Sold individually.

$131.82

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$35.85

Burner Head - Right Front

Burner head only.

$23.35

NAMEPLATE

$22.50

CAP-BURNER

$53.76

Cap,Burner(Black) (RF)

$45.09

CAP-BURNER

$36.25

Burner Head - Right Rear/Left Front

$33.75

Burner Cap - Black

This cap can be used for the right rear or left front. Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

All ignitors on the cooktop would engage whenever any of the burners were turned on.

  • Customer: Mark from Cordova TN
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 1 of 2 people found this instruction helpful
Replaced the spark module. Make sure you mark the wire locations on the existing spark module and install them in the same slots.

I was able to repalce without pulling the cooktop out. The access is from the bottom. read more