Models > KFGS306VSS01 > Instructions

KFGS306VSS01 KitchenAid Cooktop - Instructions

All installation instructions for KFGS306VSS01 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the cooktop repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the KFGS306VSS01
1-2 of 2
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

All ignitors on the cooktop would engage whenever any of the burners were turned on.

  • Customer: Mark from Cordova TN
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 1 of 2 people found this instruction helpful
Replaced the spark module. Make sure you mark the wire locations on the existing spark module and install them in the same slots.

I was able to repalce without pulling the cooktop out. The access is from the bottom.

Instructions were the pits, very poor

  • Customer: Jimmie from Cumberland VA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
  • 0 of 0 people found this instruction helpful
replaced the spuds and reset the ventures for LP. Most time was trying to decipher the instructions.
All Instructions for the KFGS306VSS01
1-2 of 2