KEYS750LQ0 KitchenAid Dryer - Instructions

we received the two heating element wires in 3 days and connected the heating element with no problem works great.

I wasn't sure which part was the problem, but the PartSelect web site is very helpful suggesting likely parts for various problems. I ordered two parts from PartSelect - a Cycling Thermostat and a Thermal Cut-Off Kit. Each of the two parts had an installation video available on the PartSelect web site. I followed the video instructions for each part. Very easy to follow, no problems at all with installation, problem with dryer is now solved. I might add I was amazed how quickly the parts arrived after I ordered from PartSelect. Parts arrived 2nd day after placing order. I would not hesitate to use PartSelect for any future needs.

I watched the video. Thermostat wasn't the problem tho. It was the timer.

The parts above did not fix the problem. We also bought 2 gas valve coils and igniter after installing them the dryer works perfectly

went online to whirlpool typed in my problem and. was directed me to Partselect which said it was thermal fuse and had picture where it was located and how to replace,easy as that.thank you PartSelect.Tim

Just as in the video. Sounds like new. Had to feel it to make sure it was running.

Pull lint screen, remove two phillips screws,pry top front up and hinge back,remove two screws at top inside, unplug door switch, lift front and remove, remove drum. Read instructions,install new parts, reverse above dis-assembly, happy dying.

Replaced Broken Belt and roller

It took longest to take apart and test to see which part was bad. I had never done it before. Got it apart and used the drawings on Parts Select to find location of parts. Testing only few minutes found bad thermostat.Ordered parts, and they came in 1 1/2 days. I replaced both thermostats being they were in the kit. Actual repair took maybe 15 minutes. Vacuumed out everything I could. Took lint trap out a vacuumed. Put it back together, plugged it in, heated like new. All time told I would say little over hour.

Ordered entire Maintenance kit - good call because it was the tensioner pulley that failed and cut the belt. To replace, had to raise the top (2 screws in lint screen slot)and pull the entire front off (2 screws - 1/ea on top inner edge of front door panel then lift it up and out) Replaced both rollers, then used the parts kit shipping box to prop up the front of the drum while installing the belt and tensioner pully. Re-assembled in reverse order, works fine.

just replaced the rollers with the new ones. The trouble was getting the belt around the drum again, but it all worked out and the dryer is running good

I replaced the on/off switch hoping that it was the problem. No such luck. It still would not start. I now have a sparkling new dryer in its place. My husband did not want to fool with it and by the time I replaced everything that it could have been with it, we would have been taken over by dirty clothes. The site was fantastic at showing me what to check and how to change the part. It was simple! Shipping time was great!

I went to partselect.com, input my model number and problem, I clicked on the right solution and watched a short video on how to repair the problem. Ordered the parts which arrived the next day. It took me ten minutes to replace the two parts I had ordered and the problem was solved. I probably saved a couple hundred dollars doing this repair myself..

Replaced Thermal Fuse

Your website was wonderful--thank you so much! When I saw that 47% of the time this was the problem, I ordered it & it worked! This was a life saver for me! I will come back to this site anytime I have an appliance problem! Thanks again!