KEYL510BWH2 KitchenAid Dryer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
door switch actuator had broke
I just remove two screws slip the old off and slip the new one on replace the two screws back put top of dry back in place replace two screws from dry lint trap
Parts Used:
-
Dale from Sparta, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dryer had no heat.
Took off the back panel removed old wires. Piggybacked new wire and put back together. The video was very helpful as far as where exactly to insert the new wire. Overall a very good experience. When it first happened my husband and I thought we would need a new dryer. We found your website and figured out what the problem most likely was. Ordeed the part it came within a few days. The money we saved not having to get a new dryer is great.
Parts Used:
-
JOSEPH from Holliston, MA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
drum turned, no heat
Dryer started to turn but stopped putting out heat. I used a multimeter, and found both high limit switches to be good, and all other electrical components good. I removed the heating element and examined it to notice that the first coil was broken. I ordered the new part and replaced it, and all is well, better than before.
Parts Used:
-
Brian from Norfolk, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Our dryer would heat up, but the barrel wouldn't turn
I watched a youtube video about how to replace a dryer belt. I did what it said.
Parts Used:
-
The from Chilmark, MA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Broken Belt on Whirlpool Dyer
-
Robert from Holyoke, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Dryer door would come open when running
Followed instuctions on video accept our appliance was the Duet HT model so we had a glass window to deal with. Just a few more screws to keep track of but otherwise a very easy repair.
Parts Used:
-
Maryanne from Deptford, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dryer keeps running without drying clothes
The first thing I did was unplug dryer from outlet. Watched installation video (very hepfull), the back was removed and dryer unpluged because I had replaced Thermal Cut-Off Kit, High Limit Thermostst and Cycling Thermostst ordered two days earlier. Forgetful as I am I did not check Heating Element with ohm meater, It was bad, ordered new one. It arrived as promised and was correct part. Removed two screws holding heating element in place. Removed four wires one at a time, placing them in correct place on new element. Replaced element and two screws. Job complete. Pluged it in and dryer is working like a new one.
Parts Used:
-
Charles from Summit, MS
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
drum not turning
Thanks to your video my husband felt very confident and the belt was installed with no problems.
Parts Used:
-
rose from garnerville, NY
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dryer wouldn't start
After doing on line research at other sites, I bought an inexpensive multimeter, took off the back of the dryer, and started trying to figure out what part wasn't working. I might as well have tried to diagnose a jet engine problem, I didn't have a clue. Then I went to the Part Select site, and their stats showed that in 50% or so of the cases where a Roper doesn't start, you need a thermal fuse, and should also replace the cycling thermostat while you're at it. The "how-to" video showed me exactly what the parts look like, and where they are in the machine, and the cost of the parts plus delivery was less than $50!! It was worth taking the chance for $50. The parts came in two days, were installed in five minutes, the dryer works and I'm thrilled! Part Select is the absolute best. This is the first appliance repair I've ever done. I would never have done it without you. Thank you.
Parts Used:
-
Rocco from Moon township, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Dryer ran but no heat
Watched the video on your site. Removed the nine screws, snapped in the element and replaced the screws. The video is perfect.
Parts Used:
-
Bob from Garner, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
dryer door would pop open
ordered new latch. Arrived promptly. Installed in 5 minutes. Actually easied than the video. Thanks
Parts Used:
-
joel from enola, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
Was this instruction helpful to you?
Thank you for voting!
Broken Door Catch
The Door Catch Kit had clear instructions for installation and included multiple replacement catches to fit several different sizes/varieties of dryers. I used a screwdriver to pry out the broken door catch, popped in the replacement, and was done! As usual, PartSelect had what I needed at a good price, with clear instructions for any needed installation. Fast shipping, too.
Parts Used:
-
Barbara from Oakland, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Unit wouldn't dry clothes
Computer said only two things were probably wrong, heating unit or fuse. My son unpluged the unit, opened the back looked around and saw the burned, broken wire in the heating unit. Orderd part, deliverd in a few days (Issac inteferred) put in the new heating unit, replaced the back, closed the unit, plugged the dryer into the eltricity, pressed the start button and there was heat. Very easy repair and a lot more reasonable then calling a service man.
Parts Used:
-
Rosemary from Covington, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
Dryer would not heat
I followed the video link on the website step by step - that was much more helpful than reading the included instructions which seemed a little obscure for this layman. I thought for sure i would have to drop another $500 on a new dryer after buying my last one less than FOUR years ago! Ended up spending $40 including shipping which was super fast.I am now a dedicated fan of partselect and I know exactly where to go when my next appliance breaks..which they seem to do way too quickly now days.
Parts Used:
-
Ian from Honolulu, AL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dryer didn't heat.
Unplugger dryer, removed the back, located and removed the thermal fuse and cycling thermostat, installed new parts plugged in the dryer and activated a drying cycle to check for burner operation, dryer cycled on burner cycled on. Problem solved reinstalled the back. Easier than I expected.
Parts Used:
-
Keith from Lakewood, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!