Models > KEYE760WAL0 > Instructions

KEYE760WAL0 KitchenAid Dryer - Instructions

All Instructions for the KEYE760WAL0
1021 - 1035 of 1165
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dryer Belt Broke
Fortunately this is an easy diagnosis and easy repair. The great PartSelect instructional videos are a HUGE HELP!!
Parts Used:
Multi Rib Belt - 92-1/4"
  • Reid from Cumming, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
loss of heat
remove back of dryer and install new part
Parts Used:
Dryer Thermal Fuse
  • Timothy from Southamton, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dryer would not run or start at all. Seemed like it had no power but the light still worked and it wasn't the breaker.
Took 12 screws off the back. One screw for the fuse. $9.32 and 30 minutes and we're back in business!
Parts Used:
Dryer Thermal Fuse
  • Joshua from Sturgeon Bay, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken belt
Followed the instructions that came with belt everthing went just fine.
Parts Used:
Multi Rib Belt - 92-1/4"
  • Rick from Emporium, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Repair? This was a Lint Filter
You know -- you take it out and clean it every time you do a load of laundry. The old one had holes in it, so we bought a new one. It fit. End of "repair."
Parts Used:
Lint Filter
  • Patricia from Glendale Avenue, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
lint screen broken
I bought aa replacement lint screen
Parts Used:
Lint Filter
  • kj from osburn, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
dryer door switch broke
I went to internet & got the part & instructions.the shipping cost more than the part. Saved 20.00 & gas.
Parts Used:
Dryer Door Switch Actuator Spring/Lever
  • Jeff from Mamaroneck, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dryer would only run for a few mins and then not restart. Also there was a grinding noise.
I replaced the entire motor in the dryer and the belt while I had it open and it is working great! I just watched the short video on the site to learn the tricks and did it myself.
Parts Used:
Drive Motor with Pulley
  • Andrew from Lawrenceville, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Gas burner would not fire.
First removed and checked the ignighter. It was fine. Next I located the schematic drawing and discovered that the burner, ignighter, and flame detector were all operated by one simple 110 volt circuit. This circuit did not power up when the dryer was cycled on. I pulled the dryer from the wall, removed the back panel, the vent etc. I then located the operating thermostat and the thermal fuze. The thermal fuze was open. (GOOD NEWS AN EASY FIX!!!) Thanks Guys
Parts Used:
Dryer Thermal Fuse
  • Leif from Plainfield, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
The control panel won't leave Casual load.
Well the video showed us taking off the back. Which wouldn't come off. Welded. Then we could not find the fuse in back of the unit or bottom. The second time we tried we found it in the front. We had to take off the front, bottom cover then we found the fuse. But, it didn't fix the problem. The unit is still on Casual load only. When we push the buttons the other lights light up but goes back to Casual. The unit is clear of lint and still drys but only at the Casual setting.
Parts Used:
Dryer Thermal Fuse
  • Ann from Cincinnati, OH
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
The dryer belt broke.
I watched the attached video that was with the belt I ordered and it took less time to do the repair, then it did to watch the video. The video was very helpful.
Parts Used:
Multi Rib Belt - 92-1/4"
  • Bill from Cooper City, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Motor hum on start-up
Trouble shot to failed motor. Ordered motor and new drive belt. The hardest part is figuring out how the dryer dis-assembles. Follow Parts Select on-line instructions. Also, several good instructional videos on You Tube! My recommendation is to order a new "blower wheel" when changing motor on a gas fired dryer. The heat combined with age bonds the blower fan to motor shaft. It had to be broken off in pieces to remove motor.
Parts Used:
Multi Rib Belt - 92-1/4" Drive Motor with Pulley
  • GREG from BLAIRSTOWN, NJ
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Belt broke tub did not turn
took off the broken belt and the idler pully went to the internet found your website watch the video and ordered the parts got the in 3 days took 15 mins to put them on and all is good
Parts Used:
Idler Pulley Assembly Multi Rib Belt - 92-1/4"
  • Larry from Clute, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Belt popped
2 screws at lint tray 2 screws on back pick up top 2 screws in front under top lid separate front from drum slip in new belt screw front back to top route around tension pully put other 4 screws in complete so dry something
Parts Used:
Multi Rib Belt - 92-1/4"
  • Wade from Labadieville, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Broken belt
Popped top up Took front panel screws out. Looked for other damage. Put belt around the tumbler and got it hooked up. Grew an extra set of hands and re assembled front the checkd seals to make sure they where on and put top back down... Process is a pain in the butt i reccomend socket set channel lock pliers and a cold beverage or two
Parts Used:
Multi Rib Belt - 92-1/4"
  • Alex Peden/ Angel from Jamestown, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the KEYE760WAL0
1021 - 1035 of 1165
Back to Top