Models > KECX160SWH0

KECX160SWH0 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KECX160SWH0

If you know the cooktop repair part you need, you can browse the list of all parts on the KECX160SWH0, or you can search by name or part description. You can also find your part by where it is located on the KECX160SWH0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for KECX160SWH0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the KECX160SWH0 [Viewing 3 of 3]

$3.71

Drip Bowl - 6"

This part has been substituted by the manufacturer and has a hole in the center. It no longer has a solid bottom.

$5.69

Drip Bowl - 8"

$9.80

Surface Burner Plug-In Block Kit

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw.

$31.28

Surface Burner - 8" - 2600W

***Please NOTE: The manufacturer recommends that you replace the burner receptacle at the same time.

$49.68

Burner Surface Element - 8"

$43.32

Delta Frame Surface Unit - 6"

This delta frame surface element with looped terminal ends and has four turns. It carries 1500 watts and is used on some of Whirlpool/Kenmore's brands of electric ranges. The center medallion is black in color.

$28.36

Gas Valve/Switch Seal Cover

Part is located on top of the igniter switch that's next to the gas valve. Helps regulate gas flow and the amount of normal leakage that may occur.

SWITCH-INF

KNOB

WASHER

Common Symptoms of the KECX160SWH0 [Viewing 1 of 1009]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Drip bowls were rusty and rotting through

  • Customer: Michael from Kings Park NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 459 of 458 people found this instruction helpful
I simply removed the elements and replaced the drip bowls with new ones. Put the elements back in and my stove looks %1000 better! read more

Just replaced ole drip bowls.

  • Customer: Roger from Osage Beach MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 369 of 373 people found this instruction helpful
Unplugged burners.....removed old bowls and replaced with new......plugged burners back in.

However, I do want you to know that I could not believe the promptness of your service and the courteous Customer Service person that assisted me with my problem in selecting the correct drip bowls. You are definitely a unique company!!!! read more

The drip bowls on my elderly mother's electric range needed to be replaced.

  • Customer: Frank from Derwood MD
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 81 of 146 people found this instruction helpful
Replacing the bowls was simple, simply removing the burner units and pulling out the bowls and inserting the new ones.

The ONLY reason I am answering this questionaire is to complement Partselect.com for their incredibly fast shipping of my parts after I placed the order. I received my order within 2-3 days with normal shipping. I expected to ... read more