Models > KECS100SWH1

KECS100SWH1 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KECS100SWH1

If you know the cooktop repair part you need, you can browse the list of all parts on the KECS100SWH1, or you can search by name or part description. You can also find your part by where it is located on the KECS100SWH1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for KECS100SWH1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the KECS100SWH1 [Viewing 4 of 4]

$3.71

Drip Bowl - 6"

This part has been substituted by the manufacturer and has a hole in the center. It no longer has a solid bottom.

$5.69

Drip Bowl - 8"

$9.80

Surface Burner Plug-In Block Kit

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw.

$31.28

Surface Burner - 8" - 2600W

***Please NOTE: The manufacturer recommends that you replace the burner receptacle at the same time.

$23.61

Burner Switch Kit

This push-to-start Robertshaw style replacement for load rated switches has a clockwise rotation. It also has a break off shaft, and comes with plastic adapters.

$49.68

Burner Surface Element - 8"

$43.32

Delta Frame Surface Unit - 6"

This delta frame surface element with looped terminal ends and has four turns. It carries 1500 watts and is used on some of Whirlpool/Kenmore's brands of electric ranges. The cente...

$34.11

Indicator Light

This light is located on the crontrol panel. It lights up if a burner is on.

Control Panel Plate

This plate is located under the burner knobs.

SCREW

Common Symptoms of the KECS100SWH1 [Viewing 1 of 1042]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Drip bowls were rusty and rotting through

  • Customer: Michael from Kings Park NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 459 of 458 people found this instruction helpful
I simply removed the elements and replaced the drip bowls with new ones. Put the elements back in and my stove looks %1000 better! read more

Just replaced ole drip bowls.

  • Customer: Roger from Osage Beach MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 367 of 371 people found this instruction helpful
Unplugged burners.....removed old bowls and replaced with new......plugged burners back in.

However, I do want you to know that I could not believe the promptness of your service and the courteous Customer Service person that assisted me with my problem in selecting the correct drip bowls. You are definitely a unique company!!!! read more

The drip bowls on my elderly mother's electric range needed to be replaced.

  • Customer: Frank from Derwood MD
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 81 of 146 people found this instruction helpful
Replacing the bowls was simple, simply removing the burner units and pulling out the bowls and inserting the new ones.

The ONLY reason I am answering this questionaire is to complement Partselect.com for their incredibly fast shipping of my parts after I placed the order. I received my order within 2-3 days with normal shipping. I expected to ... read more