Models > KECC568RPB00

KECC568RPB00 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KECC568RPB00

If you know the cooktop repair part you need, you can browse the list of all parts on the KECC568RPB00, or you can search by name or part description. You can also find your part by where it is located on the KECC568RPB00 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the KECC568RPB00 [Viewing 1 of 1]







This screw is sold individually.


Main Power Terminal Block




Glass Cooktop - Black


Electronic Control Board


Surface Element - 4300W


Element, Surface (1500W LR)



Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Baked on sauce

  • Customer: Julie from Newnan GA
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required:
  • 8 of 10 people found this instruction helpful
Used cooktop creme, oven cleaner and Mr. Clean sponges. After many days of working on the surface, we were able to remove 99% of the sauce. read more

Loose terminal caused block to overheat and break

  • Customer: Dana from Black Mountain NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 5 of 8 people found this instruction helpful
Removed all terminals and block mounting screws. Repaired one burnt terminal and reassembled. Replacement part was an exact fit and reassembly whnet very well. read more

I snapped a bolt on the main power terminal block when connecting the pigtail.

  • Customer: Frank from Palm Coast FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 3 of 4 people found this instruction helpful
Removed the small metal panel covering the main power terminal in back of the electric range. Removed the nuts holding the red, white and black electrical wires from the range using the appropriate socket (there will be two nuts on each bolt end). Removed the two screws holding the main power terminal block with appropriate screw driver. Connect the new main... read more