Models > KECC567GBT0

KECC567GBT0 KitchenAid Cooktop - Overview

Sections of the KECC567GBT0

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Surface Burner Knob – Part Number: WP9750372FF
Surface Burner Knob
★★★★★
★★★★★
(4)
PartSelect #: PS11747113
Manufacturer #: WP9750372FF
This knob allows you to turn the burner on your range or cooktop on, and it allows you to control the temperature of the burner. If your knob is broken, damaged, or lost, this is the replacement part ...
$24.11
  In Stock
Dual Surface Element - 2500w/1200w – Part Number: W10823692
Dual Surface Element - 2500w/1200w
★★★★★
★★★★★
(10)
PartSelect #: PS11764902
Manufacturer #: W10823692
This is the replacement large surface element for your cooktop or range. It is approximately 10-inches in diameter and is 1200/2500 watts. The large surface element is installed under the cooktop and ...
$229.84
  In Stock
Cooktop Cleaner – Part Number: W10355051
Cooktop Cleaner
★★★★★
★★★★★
(6)
PartSelect #: PS3492527
Manufacturer #: W10355051
This bottle of non-abrasive cooktop cleaner breaks down and gets rid of the hardest baked-on stains and residue without causing any harm to your appliance. The bottle is 10 oz and does not require a l...
$17.76
  In Stock
Surface Element Switch Kit – Part Number: 8203534
Surface Element Switch Kit
★★★★★
★★★★★
(4)
PartSelect #: PS972602
Manufacturer #: 8203534
This switch controls the stove top surface burner.
$121.26
  In Stock
Burner Knob – Part Number: WP9750372FC
Burner Knob
PartSelect #: PS11747112
Manufacturer #: WP9750372FC
Sold individually. This bisque knob accepts a double-flat shaft.
$11.10
  In Stock
Burner Knob – Part Number: WP9750372FW
Burner Knob
★★★★★
★★★★★
(1)
PartSelect #: PS11747114
Manufacturer #: WP9750372FW
Sold individually. This knob accepts a double-flat shaft.
$18.30
  In Stock
6 Inch Surface Element Infinite Switch – Part Number: WP3191049
6 Inch Surface Element Infinite Switch
★★★★★
★★★★★
(3)
PartSelect #: PS11740892
Manufacturer #: WP3191049
This switch controls the stove top surface burner.
$89.63
  In Stock
Screw – Part Number: WP3196557
Screw
PartSelect #: PS11740992
Manufacturer #: WP3196557
Sold individually.
$7.76
  In Stock
Screw – Part Number: WP486579
Screw
PartSelect #: PS11742699
Manufacturer #: WP486579
Sold individually.
$9.54
  Special Order
Switch Seal – Part Number: 3182435
Switch Seal
PartSelect #: PS337928
Manufacturer #: 3182435
  No Longer Available
Main Cooktop – Part Number: 4455556
Main Cooktop
PartSelect #: PS375584
Manufacturer #: 4455556
  No Longer Available
Screw – Part Number: WP486754
Screw
PartSelect #: PS11742701
Manufacturer #: WP486754
Sold individually.
$8.04
  In Stock

Questions And Answers for KECC567GBT0

Be the first to ask our experts a question about this model!

Common Symptoms of the KECC567GBT0

[Viewing 2 of 2]
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Radiant element, 2400 watt, under Ceran glass cok top needed replacement.
turned off power
removed ceran top from cabinet
removed element
installed new element
replaced top
powered up and was done
Parts Used:
Dual Surface Element - 2500w/1200w
  • GEORGE from NEWNAN, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
164 of 249 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad Element
Bought new element and installed. Very simple. Used phillips
screw driver.
Parts Used:
Dual Surface Element - 2500w/1200w
  • Michael from Howell, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
74 of 120 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
double coil which center coil had burned out on glass top range
Unplug range and remove back panel (4 screws) unplug top burner plugs (2). Open oven door and remove 2 screws from under front of top. Pull top out and up to unhook from back. Remove top and lay cardboard on top of range. Flip over the ranges glass top unit and lay on cardboard. Remove screws from steel bottom and remove from top. Flip over steel bottom with burners attached. Remove attaching clips for burner and unscrew them from the burner then reinstall in new burner in the same place as old burner. Lay new burner on top of old burner and remove one wire at a time, transfering it to the matching plug on the new burner. When wiring is done remove old burner and attach 2 clips to steel backing plate. Vacuum off the glass top and reinstall the steel bottom to the glass top. Flip over the top, remove cardboard and slide top into back of range top and lower into place. Attach 2 screws under front. Reattach the tops plugs at the rear and reattach the back panel. Plug in range and slide back into place. Test units and all other burners. Done...
Parts Used:
Dual Surface Element - 2500w/1200w
  • Frank from Owls Head, ME
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
50 of 56 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!