Models > KECC566RBL04

KECC566RBL04 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KECC566RBL04

If you know the cooktop repair part you need, you can browse the list of all parts on the KECC566RBL04, or you can search by name or part description. You can also find your part by where it is located on the KECC566RBL04 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the KECC566RBL04 [Viewing 1 of 1]

$3.83

SCREW

$74.00

Surface Element - 1200W

$61.68

Surface Ribbon Element with Limiter - Small

This is a 1500 watt surface element.

$17.13

Control Knob - Black

This knob is sold individually.

$50.29

Dual Burner Control Switch

This switch controls the stove top surface burner.

$40.49

6" Surface Element Infinite Switch

$3.83

SCREW

$4.60

SEAL-SWTCH

$49.20

Infinite Switch

$25.91

HARDWARE

Common Symptoms of the KECC566RBL04 [Viewing 1 of 165]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Hot Burner Light always on

  • Customer: Gregory from Cary NC
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 39 of 57 people found this instruction helpful
Thermal switch is integral to element and can not be changed, must replace entire element.

Turn off power. Removed front two screws above oven door jamb and lifted the top. Removed the bracket that holds the element against the glass top and removed the element. Moved brackets from old element to new one, aligning to same numerical position and th... read more

BURNER WOULD,NT HEAT UP.

  • Customer: david from cleveland TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
REMOVED TOP OF STOVE REPLACED HEATING ELEMENT ,PIECE OF CAKE. read more

"Hot burner" Light always On

  • Customer: Stephanie from Phoenix AZ
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
It's easier with two people.
1 - Turn the breaker for the range to OFF
2 - Verify power is off by testing the burners and lights
3 - Remove front two screws above oven door jamb
4 - Lift the top and prop it up with the spoon, or have your helper hold it.
5 - Loosen the screw at the rear of the bracket that holds the elements against ... read more