Models > KECC562GWH1

KECC562GWH1 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KECC562GWH1

If you know the cooktop repair part you need, you can browse the list of all parts on the KECC562GWH1, or you can search by name or part description. You can also find your part by where it is located on the KECC562GWH1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the KECC562GWH1 [Viewing 1 of 1]

$83.79

Dual Element with Limiter - 2400W

With this element, you can adjust the size of the burner you want to use to match your pots/pans.

$15.00

Surface Burner Knob

Sold individually.

$45.55

Surface Element Switch Kit

$4.36

Burner Knob

Sold individually. This bisque knob accepts a double-flat shaft.

$74.00

Surface Element - 1200W

$8.35

USE MCN TJ114

$61.68

Surface Ribbon Element with Limiter - Small

This is a 1500 watt surface element.

$15.89

Burner Knob

Sold individually. This knob accepts a double-flat shaft.

$38.87

6" Surface Element Infinite Switch

$3.83

SCREW

Common Symptoms of the KECC562GWH1 [Viewing 1 of 533]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Hot Burner Light always on

  • Customer: Gregory from Cary NC
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 39 of 57 people found this instruction helpful
Thermal switch is integral to element and can not be changed, must replace entire element.

Turn off power. Removed front two screws above oven door jamb and lifted the top. Removed the bracket that holds the element against the glass top and removed the element. Moved brackets from old element to new one, aligning to same numerical position and th... read more

Radiant element, 2400 watt, under Ceran glass cok top needed replacement.

  • Customer: GEORGE from NEWNAN GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 49 of 106 people found this instruction helpful
turned off power
removed ceran top from cabinet
removed element
installed new element
replaced top
powered up and was done read more

2 burner control - "Large" = "Large", "Small" = "Large"

  • Customer: Scott from Huntsville AL
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 13 of 15 people found this instruction helpful
Well, I found the two screws that held the cook top in place and backed them out. Pulled the cook top out of the counter and took out a bazillion little sheet metal screws that held the cover in place. The controllers were grouped in a cluster of four, and the "Front Left" was easy to spot. I pulled the wires off one-by-one and noted the marking on the ol... read more