Models > KECC560BWH1

KECC560BWH1 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KECC560BWH1

If you know the cooktop repair part you need, you can browse the list of all parts on the KECC560BWH1, or you can search by name or part description. You can also find your part by where it is located on the KECC560BWH1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the KECC560BWH1 [Viewing 2 of 2]

$23.61

Burner Switch Kit

This push-to-start Robertshaw style replacement for load rated switches has a clockwise rotation. It also has a break off shaft, and comes with plastic adapters.

$15.00

Surface Burner Knob

Sold individually.

$45.55

Surface Element Switch Kit

$8.35

USE MCN TJ114

$66.78

Surface Burner Element with Limiter - 6"

$3.59

Appliance Scraper

Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper, dirt, stickers and more.

$15.89

Burner Knob

Sold individually. This knob accepts a double-flat shaft.

$3.42

Switch Seal

$4.60

SEAL-SWTCH

$2.70

SCREW

Common Symptoms of the KECC560BWH1 [Viewing 1 of 173]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burner would not heat

  • Customer: Edward from Malvern AR
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 18 of 24 people found this instruction helpful
First i shut off the power since this is an electric cook top/range. I then removed the knob and the two screws that hold the burner switch in place. I removed the wires one at a time and connected each to the new switch. I then reattached the screws to the switch. The most difficult part to me was breaking off the switch stem at the right level. I got ... read more

2 burner control - "Large" = "Large", "Small" = "Large"

  • Customer: Scott from Huntsville AL
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 13 of 15 people found this instruction helpful
Well, I found the two screws that held the cook top in place and backed them out. Pulled the cook top out of the counter and took out a bazillion little sheet metal screws that held the cover in place. The controllers were grouped in a cluster of four, and the "Front Left" was easy to spot. I pulled the wires off one-by-one and noted the marking on the ol... read more

Baked on sauce

  • Customer: Julie from Newnan GA
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required:
  • 8 of 10 people found this instruction helpful
Used cooktop creme, oven cleaner and Mr. Clean sponges. After many days of working on the surface, we were able to remove 99% of the sauce. read more