Models > KECC508MWW01

KECC508MWW01 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KECC508MWW01

If you know the cooktop repair part you need, you can browse the list of all parts on the KECC508MWW01, or you can search by name or part description. You can also find your part by where it is located on the KECC508MWW01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the KECC508MWW01 [Viewing 1 of 1]

$3.84

SCREW

$89.61

Radiant Surface Element with Limiter - 8"

$2.70

SCREW

This screw is sold individually.

$2.70

Hex Nut

10-32 hex - Sold Individually - Appliance originally takes 3 of this item.

$10.48

Main Power Terminal Block

$8.31

USE MCN TJ114

$3.84

SCREW

Sold individually.

$115.46

Radiant Surface Element - 2500/1200W LF

$370.96

Main Cooktop Glass - White

$25.51

HARDWARE

Common Symptoms of the KECC508MWW01 [Viewing 1 of 111]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Baked on sauce

  • Customer: Julie from Newnan GA
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required:
  • 8 of 10 people found this instruction helpful
Used cooktop creme, oven cleaner and Mr. Clean sponges. After many days of working on the surface, we were able to remove 99% of the sauce. read more

Loose terminal caused block to overheat and break

  • Customer: Dana from Black Mountain NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 5 of 8 people found this instruction helpful
Removed all terminals and block mounting screws. Repaired one burnt terminal and reassembled. Replacement part was an exact fit and reassembly whnet very well. read more

large element failed

  • Customer: Charles from Mamaroneck NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 8 of 18 people found this instruction helpful
Easy removal (lift and pull) of the the two element unit from the Jenn-air stove top. Placed unit right side up on a work surface. used a nut driver to remove 12 screws from the unit. removed the glass cook-top, revealing the two elements. Un-hooked two wires off the old damaged element, placed wires (plug and play) onto the new unit, then replaced the glas... read more