Models > KECC508GBL2

KECC508GBL2 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KECC508GBL2

If you know the cooktop repair part you need, you can browse the list of all parts on the KECC508GBL2, or you can search by name or part description. You can also find your part by where it is located on the KECC508GBL2 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the KECC508GBL2 [Viewing 1 of 1]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$105.11

Dual Element with Limiter - 2400W

With this element, you can adjust the size of the burner you want to use to match your pots/pans.

$89.84

Surface Burner Element - 1800W

$74.00

Surface Element - 1200W

$4.60

SCREW

$8.41

USE MCN TJ114

$2.70

SCREW

This screw is sold individually.

$2.70

Hex Nut

10-32 hex - Sold Individually - Appliance originally takes 3 of this item.

$13.46

Main Power Terminal Block

$418.96

Glass Cooktop - Black

$3.54

TIE-WIRE

Common Symptoms of the KECC508GBL2 [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Hot Burner Light always on

  • Customer: Gregory from Cary NC
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 34 of 49 people found this instruction helpful
Thermal switch is integral to element and can not be changed, must replace entire element.

Turn off power. Removed front two screws above oven door jamb and lifted the top. Removed the bracket that holds the element against the glass top and removed the element. Moved brackets from old element to new one, aligning to same numerical position and th... read more

Radiant element, 2400 watt, under Ceran glass cok top needed replacement.

  • Customer: GEORGE from NEWNAN GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 40 of 85 people found this instruction helpful
turned off power
removed ceran top from cabinet
removed element
installed new element
replaced top
powered up and was done read more

Bad Element

  • Customer: Michael from Howell MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 28 of 59 people found this instruction helpful
Bought new element and installed. Very simple. Used phillips
screw driver. read more