Models > KECC507RWW05

KECC507RWW05 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KECC507RWW05

If you know the cooktop repair part you need, you can browse the list of all parts on the KECC507RWW05, or you can search by name or part description. You can also find your part by where it is located on the KECC507RWW05 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the KECC507RWW05 [Viewing 2 of 2]

$17.20

Terminal Block

It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).

$61.68

Surface Ribbon Element with Limiter - Small

This is a 1500 watt surface element.

$74.00

Surface Element - 1200W

$2.70

SCREW

This screw is sold individually.

$3.82

NUT

$3.82

SCREW

Sold individually.

$17.13

Control Knob - Black

This knob is sold individually.

$120.05

Infinite Switch - Triple Element

$116.57

Infinite Switch - Dual

$3.82

SCREW

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Hot Burner Light always on

  • Customer: Gregory from Cary NC
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 45 of 66 people found this instruction helpful
Thermal switch is integral to element and can not be changed, must replace entire element.

Turn off power. Removed front two screws above oven door jamb and lifted the top. Removed the bracket that holds the element against the glass top and removed the element. Moved brackets from old element to new one, aligning to same numerical position and th... read more

Burned terminal block and filter board

  • Customer: Joseph from Decatur GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 31 of 69 people found this instruction helpful
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem. read more

Tripple burner (left front) would not heat

  • Customer: Andrew from Baton Rouge LA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 4 of 8 people found this instruction helpful
This stove top is very easy to diagnose.. Just listen!! when you turn the control knob on... you will hear a faint "click" when the current is switched on the heating element. Making sure power source is off!! After removing the glass top (10 screws) from the base with an ohm meter measure for resistance on the burner coils.. If it is good you will get a res... read more