Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KECC507RSS03

KECC507RSS03 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KECC507RSS03

If you know the cooktop repair part you need, you can browse the list of all parts on the KECC507RSS03, or you can search by name or part description. You can also find your part by where it is located on the KECC507RSS03 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the KECC507RSS03

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.02

Screw

This screw is sold individually.

$130.89

Infinite Switch - Triple Element

$17.72

Main Power Terminal Block

$3.02

Hex Nut

This 10-32-inch hex nut works with multiple appliances in your home as a fastener. This specific model is sold individually. Hex nuts usually have 6 even sides and together they are used with bolts and screws in order to hold items firmly together. This piece is a fastener that attaches one item to another. This part has several advantages, the main one being that it is universal and can be used with most pieces and appliances in your home. This hex nut is an original equipment manufacturer part, meaning it is directly sourced from the manufacturer.

$164.17

Surface Element with Limiter - Left Front

$28.10

Cooktop Mounting Bracket & Screw

$17.36

SEAL-SWTCH

$3.77

BRACKET, BURNER

Sold individually.

$102.07

Element, Surface (2000/1000W RR)

$45.37

Tape

Common Symptoms of the KECC507RSS03

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Hot Burner Light always on

  • Customer: Gregory from Cary, NC
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 96 of 132 people found this instruction helpful
Thermal switch is integral to element and can not be changed, must replace entire element.

Turn off power. Removed front two screws above oven door jamb and lifted the top. Removed the bracket that holds the element against the glass top and removed the element. Moved brackets from old element to new one, aligning to same numerical position and th... read more

Tripple burner (left front) would not heat

  • Customer: Andrew from Baton Rouge, LA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 11 of 15 people found this instruction helpful
This stove top is very easy to diagnose.. Just listen!! when you turn the control knob on... you will hear a faint "click" when the current is switched on the heating element. Making sure power source is off!! After removing the glass top (10 screws) from the base with an ohm meter measure for resistance on the burner coils.. If it is good you will get a res... read more

Loose terminal caused block to overheat and break

  • Customer: Dana from Black Mountain, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 6 of 9 people found this instruction helpful
Removed all terminals and block mounting screws. Repaired one burnt terminal and reassembled. Replacement part was an exact fit and reassembly whnet very well. read more