Models > KECC502BWH2

KECC502BWH2 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KECC502BWH2

If you know the cooktop repair part you need, you can browse the list of all parts on the KECC502BWH2, or you can search by name or part description. You can also find your part by where it is located on the KECC502BWH2 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the KECC502BWH2 [Viewing 2 of 2]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$14.80

Surface Burner Knob

Sold individually.

$45.55

Surface Element Switch Kit

$8.41

USE MCN TJ114

$3.59

Appliance Scraper

Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper, dirt, stickers and more.

$63.39

Surface Burner Element with Limiter - 6"

$47.07

6" Surface Element Infinite Switch

$18.37

Burner Knob

Sold individually. This knob accepts a double-flat shaft.

$3.42

Switch Seal

$4.06

SEAL-SWTCH

$100.21

ELMNT-SURF

Common Symptoms of the KECC502BWH2 [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

2 burner control - "Large" = "Large", "Small" = "Large"

  • Customer: Scott from Huntsville AL
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 10 of 11 people found this instruction helpful
Well, I found the two screws that held the cook top in place and backed them out. Pulled the cook top out of the counter and took out a bazillion little sheet metal screws that held the cover in place. The controllers were grouped in a cluster of four, and the "Front Left" was easy to spot. I pulled the wires off one-by-one and noted the marking on the ol... read more

Baked on sauce

  • Customer: Julie from Newnan GA
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required:
  • 8 of 10 people found this instruction helpful
Used cooktop creme, oven cleaner and Mr. Clean sponges. After many days of working on the surface, we were able to remove 99% of the sauce. read more

Front left burner quit after bright flash under glass top

  • Customer: Brian L. from Wilkes-Barre PA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 6 of 10 people found this instruction helpful
I ohmed out the burner element that wasnt working and found it was open. I ordered a new element thru PartSelect and installed it in the stove. I powered up the stove and turned on the burner but it didnt get hot. After a bit of testing I found that the new elements safety overtemp terminals werent in the same configuration as the original unit. I made some ... read more