Models > KECC501BAL2

KECC501BAL2 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KECC501BAL2

If you know the cooktop repair part you need, you can browse the list of all parts on the KECC501BAL2, or you can search by name or part description. You can also find your part by where it is located on the KECC501BAL2 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the KECC501BAL2 [Viewing 2 of 2]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$14.80

Surface Burner Knob

Sold individually.

$8.41

USE MCN TJ114

$3.59

Appliance Scraper

Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper...

$63.39

Surface Burner Element with Limiter - 6"

$47.07

6" Surface Element Infinite Switch

$18.37

Burner Knob

Sold individually. This knob accepts a double-flat shaft.

$3.42

Switch Seal

$50.79

SWITCH-INF

$4.06

SEAL-SWTCH

$165.07

8" Surface Element with Limiter - 2100W

Common Symptoms of the KECC501BAL2 [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Baked on sauce

  • Customer: Julie from Newnan GA
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required:
  • 8 of 10 people found this instruction helpful
Used cooktop creme, oven cleaner and Mr. Clean sponges. After many days of working on the surface, we were able to remove 99% of the sauce. read more

Front left burner quit after bright flash under glass top

  • Customer: Brian L. from Wilkes-Barre PA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 6 of 10 people found this instruction helpful
I ohmed out the burner element that wasnt working and found it was open. I ordered a new element thru PartSelect and installed it in the stove. I powered up the stove and turned on the burner but it didnt get hot. After a bit of testing I found that the new elements safety overtemp terminals werent in the same configuration as the original unit. I made some ... read more

Burner not working

  • Customer: Warren C from Slidell LA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 4 of 5 people found this instruction helpful
First thing- I cut off power to the range. I then removed two screws to allow the cook top to be lifted. I marked the wiring and replaced the burner. Reapplied power and started cooking! read more