Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KEBK276SWH00

KEBK276SWH00 KitchenAid Wall Oven - Overview

Get Parts and Repair Help for KEBK276SWH00

If you know the wall oven repair part you need, you can browse the list of all parts on the KEBK276SWH00, or you can search by name or part description. You can also find your part by where it is located on the KEBK276SWH00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. We’ve also included any installation videos we have for KEBK276SWH00 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.22

Touch-Up Paint - White

18ml

$11.07

Spray Paint - 12 oz. - White

$6.80

Touch-up Paint - Black

16ml

$24.95

SEAL

$4.94

SCREW

Sold individually.

$15.93

SEAL

$122.08

Door Latch Assembly

This door lock solenoid is used with self-clean ovens. It is designed to lock the oven door, and will not open until sufficient cooling time has elapsed.

$20.80

Spray Paint - Surperior Black

This is a 12oz can of black spray paint.

$199.89

GLASS-DOOR

$211.91

GLASS-DOOR

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave light-bulb went out

  • Customer: Eric from Camas, WA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 28 of 41 people found this instruction helpful
First, I removed the grill from the top of the microwave by removing 3 screws and then by sliding it out. It was a bit tricky, but you have to rotate it under so the grill comes out from behind the display.
Next, I removed the bottom grill by removing 4 screws. This one removed easily. Then, I removed 2 more screws that were under the bottom grill an... read more

Light bulb out in oven

  • Customer: Lee from Loveland, CO
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 25 of 40 people found this instruction helpful
Removed a screw and clip to remove the lens and replaced bulb. Then replaced clip and screw. Done. read more

Scratches in Surface

  • Customer: Michelle from Richardson, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 20 of 27 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great. read more