Models > KEBK276SBL04

KEBK276SBL04 KitchenAid Oven - Overview

Get Parts and Repair Help for KEBK276SBL04

If you know the oven repair part you need, you can browse the list of all parts on the KEBK276SBL04, or you can search by name or part description. You can also find your part by where it is located on the KEBK276SBL04 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.70

Screw

This screw is sold individually.

$63.84

Temperature Sensor

This temperature sensor detects the temperature within the oven cavity.

$64.05

Broil Element

This broil element is found on the roof of the oven.

$3.86

Touch-Up Paint - White

$2.70

Screw

This screw is sold individually.

$19.04

Terminal Block

It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).

$17.55

BULB-LIGHT

$41.43

Oven Rack

Sold individually.

$9.75

Spray Paint - 12 oz. - White

$2.70

SCREW

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burned terminal block and filter board

  • Customer: Joseph from Decatur GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 22 of 46 people found this instruction helpful
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem. read more

Scratches in Surface

  • Customer: Michelle from Richardson TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 7 of 9 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great. read more

broiler element broke into

  • Customer: Salle from Marietta GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 4 of 5 people found this instruction helpful
There were 4 screws to remove and 2 wires to disconnect. We placed the order on line for replacement. It arrived the next day. We simply installed the new element by connecting the 2 wires (very easy) and putting the 4 screws back in place. It works like new and was sooo easy. read more