Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KEBK101BBL00

KEBK101BBL00 KitchenAid Wall Oven - Overview

Get Parts and Repair Help for KEBK101BBL00

If you know the wall oven repair part you need, you can browse the list of all parts on the KEBK101BBL00, or you can search by name or part description. You can also find your part by where it is located on the KEBK101BBL00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. We’ve also included any installation videos we have for KEBK101BBL00 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$22.22

2 Piece Broiler Pan

The top of this part is now black.

$7.20

Touch-Up Paint - White

18ml

$11.07

Spray Paint - 12 oz. - White

$44.18

Broiler Pan with Roasting Rack

This is a 3 piece set.

$6.60

Touch-up Paint - Black

16ml

CLEANER

$11.33

CLEANER

$20.81

Spray Paint - Surperior Black

This is a 12oz can of black spray paint.

$7.14

CLEANER

$302.71

Exterior Door Glass Assembly - Stainless

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burned terminal block and filter board

  • Customer: Joseph from Decatur, GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 56 of 127 people found this instruction helpful
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem. read more

Scratches in Surface

  • Customer: Michelle from Richardson, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 20 of 27 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great. read more

oven temp wrong

  • Customer: Alan from Wallkill, NY
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 4 of 5 people found this instruction helpful
Remove the oven door. Remove 3 self tappers on rear wall of oven to take off a round access panel. Pull out a pre-cut rectangle of insulation. Next I removed the 2 screws holding the sensor in place. Pulling the sensor out a bit told me I was "touching" the correct wires in the SMALL rectangular opening. The wires are not visable and 2 hands do not fit in t... read more