Models > KEBI276DBL1 Whirlpool

KEBI276DBL1 KitchenAid Oven - Overview

Get Parts and Repair Help for KEBI276DBL1

If you know the oven repair part you need, you can browse the list of all parts on the KEBI276DBL1, or you can search by name or part description. You can also find your part by where it is located on the KEBI276DBL1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. We’ve also included any installation videos we have for KEBI276DBL1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$41.89

Interior Oven Door Glass

This is the innermost piece of glass that faces in your oven when the door is close.

$2.70

Screw

This screw is sold individually.

$19.30

2 Piece Broiler Pan

$3.86

Touch-Up Paint - White

$41.43

Oven Rack

Sold individually.

$39.23

Door Hinge - Left or Right Side

This hinge is used for white and black models.

$4.60

SCREW

$2.70

Hex Nut

10-32 hex - Sold Individually - Appliance originally takes 3 of this item.

$9.75

Spray Paint - 12 oz. - White

$2.70

SCREW

Common Symptoms of the KEBI276DBL1 [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Inner window glass cracked

  • Customer: Evan from Albuquerque NM
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 56 of 70 people found this instruction helpful
The first thing I did was to remove the oven door by releasing the two latches on the hinges (by hand). I then raised the door toward the vertical position and lifted up. The hinges slide out of the oven housing. I laid the door, inside face up on my island counter top. This ensures that none of the parts will fall when disassembling the door. Next I un... read more

After using the "self-clean" option, the panel blew out and the door remained locked. We knew we burnt fuses but didn't know which ones. We had a technician come out and tell us which ones. ($70.00) He quoted us a price of $495.00 for parts and labor. We did the repair ourselves and cost us $157

  • Customer: Christy from Paso Robles CA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 24 of 31 people found this instruction helpful
The hardest part was getting the oven out. The double oven is pretty heavy.

The screws were on the sides under a removable strip. Have a table about the same height as the base of the oven. It was easy to slide it straight over to the table.

The schematics are on top of the oven. Although you probably won't need them for the p... read more

Digital control panel went haywire.. Control would not function

  • Customer: Anthony from Charlottesville VA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 9 of 10 people found this instruction helpful
First I removed the two screws that hold the sensor element in place (from inside the oven). I then pulled the sensor out about three inches and disconnected the two wires, and connected the new sensor. Screwed the sensor back into the back oven wall..

There was some confusion with the repair tech who first thought I would have to pull the pven o... read more