Models > KEBI141DWH1 Whirlpool

KEBI141DWH1 KitchenAid Oven - Overview

Get Parts and Repair Help for KEBI141DWH1

If you know the oven repair part you need, you can browse the list of all parts on the KEBI141DWH1, or you can search by name or part description. You can also find your part by where it is located on the KEBI141DWH1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. We’ve also included any installation videos we have for KEBI141DWH1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.70

Screw

This screw is sold individually.

$5.54

Touch-Up Paint - White

$18.07

2 Piece Broiler Pan

$2.70

SCREW

$44.65

Inner Oven Door Glass

$4.46

SCREW

$40.89

Door Hinge

Includes the coiled spring and can be used for either left or right side of appliance. Sold individually.

$33.87

Oven Rack

$8.17

Spray Paint - 12 oz. - White

$2.70

Hex Nut

10-32 hex - Sold Individually - Appliance originally takes 3 of this item.

Common Symptoms of the KEBI141DWH1 [Viewing 1 of 10]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Scratches in Surface

  • Customer: Michelle from Richardson TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 10 of 12 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great. read more

Digital control panel went haywire.. Control would not function

  • Customer: Anthony from Charlottesville VA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 9 of 10 people found this instruction helpful
First I removed the two screws that hold the sensor element in place (from inside the oven). I then pulled the sensor out about three inches and disconnected the two wires, and connected the new sensor. Screwed the sensor back into the back oven wall..

There was some confusion with the repair tech who first thought I would have to pull the pven o... read more

Inner glass

  • Customer: Michael from Denville NJ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 11 of 16 people found this instruction helpful
Take door off completely by setting hinge locks into place and then removing door. Take all of the screws out from frame (remember that the flat screws go the outside and the raised heads on the inside of door)Remove the clips on the bottom of door as well. Carefully remove frame. Then remove the inner glass clips, this will allow you to remove the broke or ... read more