Models > KEBI141DBL2

KEBI141DBL2 KitchenAid Oven - Overview

Get Parts and Repair Help for KEBI141DBL2

If you know the oven repair part you need, you can browse the list of all parts on the KEBI141DBL2, or you can search by name or part description. You can also find your part by where it is located on the KEBI141DBL2 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. We’ve also included any installation videos we have for KEBI141DBL2 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.70

Screw

This screw is sold individually.

$5.54

Touch-Up Paint - White

$18.07

2 Piece Broiler Pan

$2.70

SCREW

$44.65

Inner Oven Door Glass

$4.46

SCREW

$40.89

Door Hinge

Includes the coiled spring and can be used for either left or right side of appliance. Sold individually.

$33.87

Oven Rack

$8.17

Spray Paint - 12 oz. - White

$2.70

Hex Nut

10-32 hex - Sold Individually - Appliance originally takes 3 of this item.

Common Symptoms of the KEBI141DBL2 [Viewing 1 of 10]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Scratches in Surface

  • Customer: Michelle from Richardson TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 10 of 12 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great. read more

Digital control panel went haywire.. Control would not function

  • Customer: Anthony from Charlottesville VA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 9 of 10 people found this instruction helpful
First I removed the two screws that hold the sensor element in place (from inside the oven). I then pulled the sensor out about three inches and disconnected the two wires, and connected the new sensor. Screwed the sensor back into the back oven wall..

There was some confusion with the repair tech who first thought I would have to pull the pven o... read more

Broken inner door glass

  • Customer: Elizabeth from Seattle WA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 10 of 14 people found this instruction helpful
I removed all the screws attaching the inner liner to the door, then removed the broken glass. I did this before ordering the replacement glass so I could be sure that only one piece was broken -- the door contains four pieces of glass in all. After the replacement glass arrived (really fast delivery!), I cleaned all the parts and reassembled the door. I ... read more