Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KDRU707VSS01

KDRU707VSS01 KitchenAid Range - Overview

Get Parts and Repair Help for KDRU707VSS01

If you know the range repair part you need, you can browse the list of all parts on the KDRU707VSS01, or you can search by name or part description. You can also find your part by where it is located on the KDRU707VSS01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for KDRU707VSS01 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$51.55

Inner Door Glass

Glass ONLY.

$5.15

Screw

This screw is sold individually.

$8.70

Grate Feet - Pkg 4

$16.26

Block, Terminal

$65.37

Temperature Sensor

This temperature sensor detects the temperature within the oven cavity.

$5.15

SCREW

Sold individually.

$5.10

Screw, 8/18 x 3/8

This screw is sold individually.

$7.35

CLEANER

$18.87

Light Bulb

$5.15

Screw

This screw is sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broke the glass panel inside the oven door -- dropped a baking dish on the glass!

  • Customer: Robert from Wildwood, MO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 138 of 174 people found this instruction helpful
Easily removed the door from the oven by releasing clips attached to the door hinge -- very nicely engineered. Removed about 6 philips head screws to allow the door assembly to be taken apart for access to the glass. Lifted out the broken glass, cleaned the inside of the door, installed the new glass, reassembled the door (a two minute project), and reatt... read more

Cracked the inner door glass by wiping with wet rag when hot

  • Customer: James from Renton, WA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 41 of 47 people found this instruction helpful
Removed the oven door by following the straightforward instructions in the user's manual. Removed philips head screws to take the door assembly apart. Removed clips holding the two inner door glass plates, and the two plates. Removed the clamp holding the broken glass plate, then the glass and associated glass fragments. Then cleaned and re-installed the... read more

cracked iner door glass

  • Customer: william from albuquerque, NM
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 23 of 28 people found this instruction helpful
Important note: hinges are left and right do not mix them up or door will not re-assemble properly and you'll get to do it twice.

Steps I took:

Removed the oven door per the instructions in the oven operator manual. Removed several screws to release the interior steel liner.

Removing the steel liner was a bit of a hassle, Ha... read more