Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KDRP487MSS03

KDRP487MSS03 KitchenAid Range - Overview

Get Parts and Repair Help for KDRP487MSS03

If you know the range repair part you need, you can browse the list of all parts on the KDRP487MSS03, or you can search by name or part description. You can also find your part by where it is located on the KDRP487MSS03 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for KDRP487MSS03 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$43.14

Oven Rack

Sold individually.

$4.89

SCREW

Sold individually.

$6.70

Door Bumper - Black

Sold individually.

$90.40

Griddle

This griddle can be used on gas and electric cooktops.

$21.68

Handle Bracket - Right

$21.01

Handle Bracket - Left

$7.11

Hinge Pin Kit

Includes 4 hinge pins. Used at hinges to hold door open so the door can be lifted off.

$60.62

Bake Element

This bake element is found on the bottom of the oven.

$44.70

RACK-OVEN

BEZEL-KNOB

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Self Cleaning blows the thermostat fuse

  • Customer: Joseph from Worthington, PA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 108 of 119 people found this instruction helpful
Something Kitchen Aid wont tell you but running a self clean on this model stove blows the fuse located on the back of the stove.

First I slid the stove out and removed the back of the stove held in place by 8 Phillips screws. The thermostat fuse is located near the top middle on the back of the stove. Remove the 2 screws holding it in place. Dis... read more

Power shut down and door lock-up after self-cleaning

  • Customer: john from new market, MD
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 36 of 38 people found this instruction helpful
My wife used the self cleaning function for the first time after 1.5 years of owning, of course out of warranty. A quick google search identified the problem. Called Kitchenaid, they said of course it can't be that simple, they had never heard of this problem, need to schedule a service call. Googled and found this site, Ordered the part, came in, only took... read more

Microwave light-bulb went out

  • Customer: Eric from Camas, WA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 30 of 44 people found this instruction helpful
First, I removed the grill from the top of the microwave by removing 3 screws and then by sliding it out. It was a bit tricky, but you have to rotate it under so the grill comes out from behind the display.
Next, I removed the bottom grill by removing 4 screws. This one removed easily. Then, I removed 2 more screws that were under the bottom grill an... read more