KDI21AD KitchenAid Dishwasher - Instructions

Just remove the original parts, unplugged the resistance coils, install the new parts and reconnect the coils.

placed on with hand

Ordered a new Faucet Adapter! Simple

Removed the existing element and replaced it with the new one.

Found the adapter on Parts select through a google search. Unscrewed the existing faucet aerator and srewed in the adapter. The plastic shrink wrap holds the washer and screen in place, so don't open it until you're ready to install. Finger snug does it, only use the pliers to remover the old aerator from the faucet. Normally, I don't use pliers, but both of these parts were round and had vertical serrations to engare the plier teeth.

Took screwdriver popped out old latch in cabnet. Took pliers popped out latch out of door. Snaped new latch parts back in.

Removed upper dish basket. Removed old tube. Reshaped female ends of flat new tube to more rounded shape with fingers to match male fitting onto which the tube would fit. Pushed new tube firmly and snugly onto existing fittings. Replaced dish basket.

I took the old one off and slipped the new one on. It really was that easy. No big deal at all!

Repair was very easy simply used a screwdriver to remove the cracked old latch and used my fingers to insert my new latch.

My folks are 84 and 85. They thought they needed a new dishwasher. For less than $25.00 I fixed it. All it required to cut in 1/2 the old piece and remove it. That was the hard part it wanted to crumble. Then force the ends into the brackets of the dishwaser. Took about 3 minutes. It works perfectly. Thanks to your operator/service person. She explained it perfectly.

Isimply pulled the old burner unit and followed the instructions that came with the replacement.

Rubber tube went right in. Watched video on how to remove pieces that hold wheels onto rack. These pieces DO NOT JUST SNAP OFF as in the video, they break off, which renders them useless! So, spend the extra money and buy the pieces that hold the wheels onto the rack.

Removed old piece from old adapter and attached to new piece. Pushed new piece into receiving pipe and job finished. very easy to install. Directions included in part.

old hose fell off. heated up new hose in hot water one end only and it went right on.

Step 1: remove new latch from bag in which part comes. Step 2: push latch into hole where the other latch was. Step 3: enjoy having a dryer you dont have to hold closed with a folding chair.