Models > KDI21A Whirlpool > Instructions

KDI21A KitchenAid Dishwasher - Instructions

All installation instructions for KDI21A parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the KDI21A
1-15 of 294
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Door Catch part had fallen out,/ was missing

  • Customer: Terri from Saint Augustine FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 493 of 496 people found this instruction helpful
Received your parts, Popped them both right into place, Even though only one side needed to be replaced, I wanted them to match up. It was amazing how easy this was. My husband was quite impressed I had ordered these rather then look for either a new or used dryer from some other source.

roller axels were broken and wheels missing

  • Customer: Robert from Chlemsford MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 459 of 459 people found this instruction helpful
pulled out the old broken axels and pushen in the new ones and then snapped in the wheels.

replace roller axles, wheels and silverware basket

  • Customer: William from Washington DC
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 363 of 365 people found this instruction helpful
...popped out the old in with the new...could not have been easier!

Door wouldn't latch.

  • Customer: Melody from North Las Vegas NV
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 150 of 221 people found this instruction helpful
I can't believe I waited so long to find this part and do this. I got the package very fast, opened it, took the piece to my dryer and popped it into place with my fingers. It worked perfectly! this took all of two minutes and saved me from having to hold the dryer door closed with a stick. Thank you, thank you!!!

dryer door would not stay shut

  • Customer: Pam from Woodbridge VA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 75 of 75 people found this instruction helpful
This repair was a cinch. Pliers to pull out the metal piece and a screwdriver to pry out the 'catch' part in the door. Both replacement pieces went right in. I cannot believe how easy and CHEAP this fix was, and I'm so glad I found this site!! I figured I would have to call a repairman and pay big bucks, so I put it off, but the door was getting worse--slamming it so hard to keep it shut. Again, thanks for this great site.

door kept coming open dryer shuts off

  • Customer: RONALD from SALMON ID
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 80 of 143 people found this instruction helpful
use screwdriver topry plastic out plyers to pull out metal latch put new parts in

Door won't latch

  • Customer: Jill from bellevue WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 75 of 133 people found this instruction helpful
I did NOT have to repair the latch on the actual door, just the small metal piece that it hooks on (on the dryer itself) and it took about 10 seconds to.....do it myself. Just used needle nose pliers so squeeze the piece together and fit it in. thanks

Old wheels were going away 1 by 1

  • Customer: brett from newbury pk. CA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 75 of 138 people found this instruction helpful
I took the dishtray outside to the patio and removed all the old wheels and axles. Sipped some coffee and then snapped on all the new axles and wheels. It now rolls like new even when full of dishes. I,m glad I found your website again!

Replaced the rollers on the new dishrack

  • Customer: Carol from Darien CT
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 73 of 137 people found this instruction helpful
Soaked the axles in warm water and installed them, then placed the roller wheel on the axle. A no-brainer!

Bottom rack was rusty and prongs had broken off

  • Customer: Kathleen from Bergenfield NJ
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 67 of 130 people found this instruction helpful
With a very upset husband. The wheels were difficult to take off, although after he got the hang of it he stopped breaking them. I had ordered 6 wheels and axles, should have ordered 8, but the ones he didn't break we could use again. Now, the old cutlery basket from the old rack does not fit into the new rack. Today I ordered a new basket after being told the manufacturer must have changed the rack. Hoping the new basket fits the new rack.

Broken Roller Wheels and Axles

  • Customer: David from Mount Vernon NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 64 of 125 people found this instruction helpful
Removed broken axles by hand and installed new axles and wheels. The repair took less than 5 mins.

Rubber water tube had dissentagrated with age.

  • Customer: leeann from laceyville PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 25 of 25 people found this instruction helpful
Since the old part had fallen off of the appliance, all I needed to do was reattach the new parts, by sliding the hose onto where the water comes through and then attach the hanger to the top rack of the dishwasher. It was very easy to do and required no tools and took about a minute to finish.

I needed drip bowls that fit properly

  • Customer: Marilyn from Peachtree City GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 24 of 14 people found this instruction helpful
I ordered gray enamel drip bowls and they fit perfectly. Unfortunately 2 of them were chipped and bent slightly. They still worked which was better than the make shift ill fitting ones that came with the house so I decided to keep them. I did tell parts select about it and they sent me a new order of drip pans at no charge. I used the perfect ones but the 8" drip pans flaked off paint after one use. I guess this is an Amana defect...the paint doesn't stick under heat.

I had bought the portable dishwasher from an add in the paper and unfortunately I was unaware that they require faucet adapters and it was not given to me along with the appliance.

  • Customer: Ronald from Chebanse IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 19 of 22 people found this instruction helpful
I ordered the part and it fit perfectly!! About five minutes to screw it onto my faucet and problem solved!!!

old rusting dish rack needed to be replaced

  • Customer: Kathleen from Burlington VT
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 16 of 18 people found this instruction helpful
I replaced the rack of my old Kitchen Aid dishwasher which is AT LEAST 40 years old... maybe 50 but runs fine. I just unscrewed the wheels from the old rusty rack and attached them to the new rack and popped it in place. Very easy!
All Instructions for the KDI21A
1-15 of 294