Models > KDDO24CVX00

KDDO24CVX00 KitchenAid Refrigerator - Overview

Get Parts and Repair Help for KDDO24CVX00

If you know the refrigerator repair part you need, you can browse the list of all parts on the KDDO24CVX00, or you can search by name or part description. You can also find your part by where it is located on the KDDO24CVX00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for KDDO24CVX00 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$108.19

Replacement Ice Maker

***NOTE: Ice maker does NOT come with the bail or shut off arms. Must order them separately if required. It does come complete with flat and round plug wiring harness, the mounti...

$3.76

Icemaker Water Fill Tube Kit

This kit comes with a fill tube and a compression nut.

$16.62

Water Filter Cap

This black water filter cap is located near the bottom kickplate.

$30.74

Filter Inlet Water Tube

As per the manufacturer, this part starts out as 1/4" tubing but ends up at 5/16".

$50.25

Water Filter

This part is accessed from the front of the refrigerator and it is recommended that the filter be changed every 6 months. Sold individually.

$38.11

Ice Container

$3.83

COVER-FRNT

$64.50

HOUSING

$118.14

HARNS-WIRE

$3.36

SCREW

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Ice Maker quit working, I could manually cycle unit but then the water would overflow when unit was re-filling.

  • Customer: Max from Green Castle IN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 475 of 481 people found this instruction helpful
I backed out the 2 top screws about a quarter inch and then removed bottem screw with a quater inch nut driver. I then lifted Ice Maker clear of the two top screws and lowered it enough to unclip the power connection with a small screwdriver. The new Ice Maker was wired correctley for my refrigeator so all I had to do wea reconnect the power connection and... read more

No Ice in the Ice Maker

  • Customer: Chris from Duluth GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 140 of 154 people found this instruction helpful
I am NOT a handyman, and my family laughed at me when I said I was going to fix the ice maker all by myself. I ordered a replacement ice maker. When it arrived, I opened the box and read the instructions. It seemed easy. I removed the old ice maker, with a socket set. I then took off the shut off lever from the old one and placed it on the new one, sinc... read more

icemaker leaking infreezer compartment

  • Customer: John from Oberlin LA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 75 of 91 people found this instruction helpful
first I backed off top two screws and removed bottom screw. unplugged wire harness. removed old icemaker. harness on new icemaker was the same. plugged in hung new icemaker on top two screws installed bottom screw. turned water on job complete and very easy. I was very satisfied with the whole process. read more