Models > KCMS135GBS0

KCMS135GBS0 KitchenAid Microwave - Overview

Get Parts and Repair Help for KCMS135GBS0

If you know the microwave repair part you need, you can browse the list of all parts on the KCMS135GBS0, or you can search by name or part description. You can also find your part by where it is located on the KCMS135GBS0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$18.81

Turntable Roller Guide

This roller is located underneath the glass turntable. With the help of the motor, this roller helps to rotate the glass tray. This part takes the place of the coupling.

$30.04

Glass Cooking Tray

This tray rotates in your microwave ensuring more even temperatures.

$44.27

Door Interlock Switch Kit

This kit contains 2 switches - 15 Amp - 125/250 Volt with 3/16" terminals.

$2.70

Wave Guide Rivet

This rivet is used for the stirrer cover/wave guide. They are sold individually.

$3.83

SCREW

$29.20

Wave Guide Cover

$3.96

SPRING

$51.33

Turntable Motor

This motor rotates the glass turntable in the microwave.

$2.77

SCREW

$16.38

USE WPL 815174

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave worked intermittently depending on how door was closed

  • Customer: Robert from Bainbridge Island WA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 27 of 33 people found this instruction helpful
Remove top grille (2 screws), undo control panel (1 screw). Tilt down control panel, switches are on the left. There are actually three switches that are involved with the door, two horizontally mounted, one vertically mounted. This would be an EASY REPAIR, but it took me a while to figure out which of the three switches was bad, and also took a while to ... read more

Broken tray ring for rotation of dish.

  • Customer: Michael from Sewanee TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 13 of 14 people found this instruction helpful
Used needle nose to pull off piece of old ring. Layed in new one. read more

No Power to Microwave

  • Customer: John from Palos Hills IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 16 of 30 people found this instruction helpful
After determined the problem on one of the websites...I received the part I needed... removed the control panel and installed the new main fuse In about 15 mins! read more