Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KCDC150G

KCDC150G KitchenAid Food Waste Disposer - Overview

Parts and Repair Help for models starting with KCDC150G

If you know the food waste disposer repair part you need, you can browse the list of all parts for models starting with KCDC150G, or you can search by name or part description. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with KCDC150G

Exact Part matches for your search term

[Viewing 1 of 1]

DISCONTINUED

This part number matches the current model number "KCDC150G".

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.19

Screw (4)

Sold Individually.

$13.37

Splash Guard

This is a black flexible rubber cover that is over the top of the sink drain, used for your food waste disposer. It keeps liquids and smaller food particles from splashing back into the sink. The splash guard can become worn out over time and may need to be replaced. Make sure to disconnect the power before beginning your repair. This part is 3.75 inches in length, 3.75 inches in width, 0.75 inches in height and weighs 0.119 lbs. Remove the drain pipe from the disposal, and turn the mounting ring. Remove the old cover with a screwdriver and place the new one into place.

$10.87

Stopper

The stopper, also known as a splash guard, is located over the top of a sink drain and garbage disposal unit. With a hole in the center, the stopper will allow water and food items...

$4.12

Sink Flange Gasket/Seal

$29.05

TAILPIPE

This is a tailpipe, but you may also know it as a drain pipe, and it is compatible with your garbage disposal. The most common reason for needed to replace this part is if it is da...

$29.11

KIT-FLANGE

$6.92

Mounting Ring

$13.84

Garbage Disposal Wrench

$6.04

GASKET

This is a garbage disposer tailpipe gasket. It is black in color and measures about 2 inches in diameter. This gasket is meant to create a watertight and airtight seal around the t...

$28.77

FLANGE

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Leak at disposer drain connection

  • Customer: Herbert from Morehead City, NC
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 2 of 3 people found this instruction helpful
Disconnected the disposer elbow and replaced the gasket. But, the original elbow would not make a watertight connection. Replaced the elbow with one having a tapered connection... problem solved. Most of the time was spent going to the hardware to find a new elbow that would work. read more