Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KBRS22ETBL01

KBRS22ETBL01 KitchenAid Refrigerator - Overview

Get Parts and Repair Help for KBRS22ETBL01

If you know the refrigerator repair part you need, you can browse the list of all parts on the KBRS22ETBL01, or you can search by name or part description. You can also find your part by where it is located on the KBRS22ETBL01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for KBRS22ETBL01 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$97.39

Replacement Ice Maker

NOTE: This replacement ice maker mechanism does NOT come with a cover,shut off arm, a wire harness, or the mounting hardware. Must be ordered separately.

$23.23

Light Switch

This part turns on the light when the door is opened.

$7.22

Touch-Up Paint - White

18ml

$29.83

Thermistor

Long harness thermistor kit.

$25.56

BLADE-FAN

The fan blade is used to blow air over the condenser.

$19.34

Drawer Gear Kit

These parts will attach to your drawer rail and are used to help the drawer glide smoothly.

$79.38

Freezer Door Gasket - White

This door gasket is used to make an air-tight seal for the cabinet when the door is closed.

$11.07

Spray Paint - 12 oz. - White

$6.92

Stainless Steel Cleaner

Use this bottle of stainless steel cleaner and polish for any of your stainless steel appliances.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Icemaker producing few or no cubes and often leaving "kling-ons" on ice tray

  • Customer: Bernie from Diamond Bar, CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 661 of 697 people found this instruction helpful
Interior surface of ice tray felt rough & flaky (coating deteriorated) so cubes would not release.
Unplug appliance.
Remove timer cover by hand pressure @ edge.
Remove single attachment screw & bracket at lower front of icemaker.
Disconnect wiring harness from socket @ rear of compartment.
Tricky part was determining what type of con... read more

light on to order water filter

  • Customer: Douglas from Byron, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 655 of 697 people found this instruction helpful
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute. read more

Ice maker leaking at first then quit making ice all together

  • Customer: Hootie from Joshua, TX
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 386 of 417 people found this instruction helpful
unplugged refrigerator and shut off water, removed one screw and loosened two more, after removing one side of the ice bucket rail, unplugged electrical from old ice maker. Then I removed the bail and out on new one, reinstalled ice maker in reverse order from taking it out. read more