Models > KBRC36FKS00

KBRC36FKS00 KitchenAid Refrigerator - Overview

Get Parts and Repair Help for KBRC36FKS00

If you know the refrigerator repair part you need, you can browse the list of all parts on the KBRC36FKS00, or you can search by name or part description. You can also find your part by where it is located on the KBRC36FKS00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for KBRC36FKS00 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Replacement Ice Maker

***NOTE: Ice maker does NOT come with the bail or shut off arm. Must order them separately if required. It does come complete with flat and round plug wiring harness, the mountin...


Ice and Water Filter

This filter is mounted in the bottom grille. Sold individually.


Icemaker Control Assembly

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.


Light Rocker Switch

This light switch is triggered by the door opening and closing.


Water Filter Cap

This black water filter cap is located near the bottom kickplate.


Water Fill Cup and Bearing


Fan Blade

Used with Evaporator Fan Motors.


Single Shelf Stud

This part screws into the side of the wall in your fresh food compartment and supports a shelf.


Light Socket Kit

The bulb is sold separately.



Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Ice Maker quit working, I could manually cycle unit but then the water would overflow when unit was re-filling.

  • Customer: Max from Green Castle IN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 524 of 537 people found this instruction helpful
I backed out the 2 top screws about a quarter inch and then removed bottem screw with a quater inch nut driver. I then lifted Ice Maker clear of the two top screws and lowered it enough to unclip the power connection with a small screwdriver. The new Ice Maker was wired correctley for my refrigeator so all I had to do wea reconnect the power connection and... read more

No ice

  • Customer: Daniel from Suwanee GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 398 of 475 people found this instruction helpful
removed flap door in front of icemaker...removed 3 screws with bolt heads...removed one additional screw with bolt head and ice unit slid out. I removed motor unit (pops out no screws). Replaced and had ice within 3 hours. read more

Change ice/water filter

  • Customer: Nora from Bethesda MD
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 256 of 344 people found this instruction helpful
It was really easy. Took off grill at bottom of refrigerator, turned existing filter to get it out and then inserted the new one. read more