Models > KBMC147HWH03

KBMC147HWH03 KitchenAid Microwave - Overview

Get Parts and Repair Help for KBMC147HWH03

If you know the microwave repair part you need, you can browse the list of all parts on the KBMC147HWH03, or you can search by name or part description. You can also find your part by where it is located on the KBMC147HWH03 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$57.83

Glass Cooking Tray

$5.54

Touch-Up Paint - White

$2.70

Screw

This screw is sold individually.

$18.69

Baseless Lamp

This is a small light bulb.

$2.70

SCREW

$4.46

SCREW

$37.32

Turntable Support Kit

$8.17

Spray Paint - 12 oz. - White

$2.70

Hex Nut

10-32 hex - Sold Individually - Appliance originally takes 3 of this item.

$52.62

Turntable Motor

This motor is used to rotate the cooking tray.

Common Symptoms of the KBMC147HWH03 [Viewing 1 of 11]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave glass turntable when pop

  • Customer: Liza from Monterey CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 18 of 22 people found this instruction helpful
After popping the last few kernals of popcorn, we hear a different kind of pop sound come from our microwave oven. When we looking inside, we found that the glass turntable had broken unevenly in half. Although we didn't understand why it had happned, we did know we'd be without the use of the microwave without a new one. After less than 10 minutes surfin... read more

Microwave turntable does not work

  • Customer: Todd from San Bernardino CA
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Pliers, Screw drivers
  • 18 of 23 people found this instruction helpful
My unit is a wall mount/cabinet/built-in model. The repair is actually fairly simple once you determine that the actual microwave is just a component of the entire unit, and that it (the microwave) can be easily removed from the unit. I did not figure this out until after I removed the entire unit (disconnect the power supply, lift the entire bulky, heavy ... read more

This is a halogen light bulb. The bulb would not burn.

  • Customer: Robert J from Laguna Vista TX
  • Difficulty: Very Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)
  • 11 of 15 people found this instruction helpful
This is the second time this has occurred. The first was still in original warrenty. It took two Sears servicemen to dis mantel and obtain access to the bulb. One had to hold it up in the cabinet while the other took off the tope to get to the bulb. I purchased an additional extended warranty for three more years but when I called this time they said that li... read more