Models > KBLS36FKT02

KBLS36FKT02 KitchenAid Refrigerator - Overview

Get Parts and Repair Help for KBLS36FKT02

If you know the refrigerator repair part you need, you can browse the list of all parts on the KBLS36FKT02, or you can search by name or part description. You can also find your part by where it is located on the KBLS36FKT02 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for KBLS36FKT02 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$111.18

Replacement Ice Maker

***NOTE: Ice maker does NOT come with the bail or shut off arms. Must order them separately if required. It does come complete with flat and round plug wiring harness, the mounti...

$76.92

Icemaker Control Assembly

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.

$7.28

Light Rocker Switch

$55.64

Water Filter

This filter comes with cyst remover and fits refrigerators with a water filter located in the base grill below the door. It is recommended to replace the filter every 400 gallons or 6 months - whatever comes first.

$19.16

Water Filter Cap

This black water filter cap is located near the bottom kickplate.

$18.32

Water Fill Cup and Bearing

$3.96

Single Shelf Stud

$2.03

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$3.96

Water Filter Cap

This cap is biscuit in color.

$28.51

Fan Blade

Used with Evaporator Fan Motors.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

No ice

  • Customer: Daniel from Suwanee GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 273 of 326 people found this instruction helpful
removed flap door in front of icemaker...removed 3 screws with bolt heads...removed one additional screw with bolt head and ice unit slid out. I removed motor unit (pops out no screws). Replaced and had ice within 3 hours. read more

No Ice in the Ice Maker

  • Customer: Chris from Duluth GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 137 of 151 people found this instruction helpful
I am NOT a handyman, and my family laughed at me when I said I was going to fix the ice maker all by myself. I ordered a replacement ice maker. When it arrived, I opened the box and read the instructions. It seemed easy. I removed the old ice maker, with a socket set. I then took off the shut off lever from the old one and placed it on the new one, sinc... read more

icemaker leaking infreezer compartment

  • Customer: John from Oberlin LA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 73 of 89 people found this instruction helpful
first I backed off top two screws and removed bottom screw. unplugged wire harness. removed old icemaker. harness on new icemaker was the same. plugged in hung new icemaker on top two screws installed bottom screw. turned water on job complete and very easy. I was very satisfied with the whole process. read more