Models > KBLS36FKB02

KBLS36FKB02 KitchenAid Refrigerator - Overview

Get Parts and Repair Help for KBLS36FKB02

If you know the refrigerator repair part you need, you can browse the list of all parts on the KBLS36FKB02, or you can search by name or part description. You can also find your part by where it is located on the KBLS36FKB02 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for KBLS36FKB02 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$108.19

Replacement Ice Maker

***NOTE: Ice maker does NOT come with the bail or shut off arms. Must order them separately if required. It does come complete with flat and round plug wiring harness, the mounti...

$72.18

Icemaker Control Assembly

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.

$44.50

Water Filter

This filter comes with cyst remover and fits refrigerators with a water filter located in the base grill below the door. It is recommended to replace the filter every 400 gallons ...

$16.59

Water Filter Cap

This black water filter cap is located near the bottom kickplate.

$6.98

Light Rocker Switch

$14.89

Water Fill Cup and Bearing

$2.03

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$67.84

Ice Mold

This ice cube mold and heater assembly has a flake resistant surface. It is used with modular style icemakers on some refrigerators.

$3.96

Water Filter Cap

This cap is biscuit in color.

$82.55

Icemaker Motor Kit

This kit includes the module motor, ejector arm, and ice stripper arm. The complete icemaker is sold separately.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Ice Maker quit working, I could manually cycle unit but then the water would overflow when unit was re-filling.

  • Customer: Max from Green Castle IN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 494 of 501 people found this instruction helpful
I backed out the 2 top screws about a quarter inch and then removed bottem screw with a quater inch nut driver. I then lifted Ice Maker clear of the two top screws and lowered it enough to unclip the power connection with a small screwdriver. The new Ice Maker was wired correctley for my refrigeator so all I had to do wea reconnect the power connection and... read more

No ice

  • Customer: Daniel from Suwanee GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 327 of 391 people found this instruction helpful
removed flap door in front of icemaker...removed 3 screws with bolt heads...removed one additional screw with bolt head and ice unit slid out. I removed motor unit (pops out no screws). Replaced and had ice within 3 hours. read more

No Ice in the Ice Maker

  • Customer: Chris from Duluth GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 142 of 156 people found this instruction helpful
I am NOT a handyman, and my family laughed at me when I said I was going to fix the ice maker all by myself. I ordered a replacement ice maker. When it arrived, I opened the box and read the instructions. It seemed easy. I removed the old ice maker, with a socket set. I then took off the shut off lever from the old one and placed it on the new one, sinc... read more