Models > KBLS22KVSS3

KBLS22KVSS3 KitchenAid Refrigerator - Overview

Get Parts and Repair Help for KBLS22KVSS3

If you know the refrigerator repair part you need, you can browse the list of all parts on the KBLS22KVSS3, or you can search by name or part description. You can also find your part by where it is located on the KBLS22KVSS3 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for KBLS22KVSS3 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$13.64

Center Crisper Rail

$37.17

Run Capacitor

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

$3.76

Ladder Hook

Sold Individually.

$2.70

Screw

Sold individually.

$2.70

Screw

This screw is sold individually.

$18.45

Light Switch

$5.54

Touch-Up Paint - White

$52.09

Crisper Pan

$23.90

Drain Tube Kit

Also known as a duck bill. This kit includes the tube extension piece and spacer.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

My refrigerator stopped cooling and the freezer section stopped freezing

  • Customer: garth from forest lake MN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 101 of 109 people found this instruction helpful
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot ... read more

Cracked & Snapped Center Crisper Rail

  • Customer: Ruth from Roxbury MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 48 of 49 people found this instruction helpful
A very easy fix took all of five minutes read more

while closing the door, the light switch fouled, resulting in the switch breaking

  • Customer: Kevin from Beckley WV
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 20 of 23 people found this instruction helpful
I used a flat screwdriver and released the lock tab on the bottom of the light switch, and pried the switch out, being careful to not damage the plastic around the mounting place of the switch, unplugged wiring from old switch, plugged in the new one and pushed the new switch into place. Job finished light switch now working. read more