Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KBLS19KTMS3

KBLS19KTMS3 KitchenAid Refrigerator - Overview

Get Parts and Repair Help for KBLS19KTMS3

If you know the refrigerator repair part you need, you can browse the list of all parts on the KBLS19KTMS3, or you can search by name or part description. You can also find your part by where it is located on the KBLS19KTMS3 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for KBLS19KTMS3 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.88

Light Bulb - 40W

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these repla...

$30.17

Center Crisper Rail - White

This is the center support rail for the refrigerator crisper drawer. This rail supports center of the crisper frame.

$5.25

Ladder Hook

Sold Individually.

$24.78

P-Trap Drain Tube Kit

The p-trap drain tube kit may also be known as the duck bill, or the drain pipe, and it is compatible with your refrigerator. The function of the p-trap drain kit is to carry the water that has formed during the defrost cycle to the bottom of the refrigerator, where your drain pan is located. The tools you will need for this repair include a 1/4-inch nut driver and a small flat-blade screwdriver. To do this repair you will need to pull the refrigerator forward in order to reach the lower access panel at the back. This kit includes the tube extension piece and spacer.

$5.52

Screw

Sold individually.

$22.07

Light Switch

This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light when your fridge door is open, and to make sure it is off when your refrigerator door is closed. The reason you would need to replace this part is if your light is not turning on when your door is open. For this repair, you will need a putty knife, and a small flat-blade screwdriver.

$31.55

Door Bin

Sold individually.

$29.94

Fan Blade

Used with Evaporator Fan Motors.

$19.63

Light Switch - 2 Terminal

This part turns the light on as the door opens.

$57.59

Crisper Drawer - Clear

Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Freezer is cold, Refridgerator is not as cold as it should be

  • Customer: Russell from Hardinsburg, KY
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers
  • 293 of 355 people found this instruction helpful
Having seen this problem before in other equipment so I had an idea where to look. Problem: the automatic defrost function was not operating. Looking through openings in the back panel of the freezer compartment, you could see the evaporator coils and fins were a solid chuck of ice. There are three logical components to check. Heater element, thermostat ... read more

Cracked & Snapped Center Crisper Rail

  • Customer: Ruth from Roxbury, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 157 of 164 people found this instruction helpful
A very easy fix took all of five minutes read more

defroster mode was not working causing freezer to ice up and refrigerator to be warm. Also fan was running continuely

  • Customer: James from Welches, OR
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 149 of 170 people found this instruction helpful
The hard part for me was figuring out which part was causing the problem. I read what others had done and followed their test methods. I checked the defroster heater for continuity and the defroster thermostat to make sure it was closing. the defroster termostat has to be cold to check it. You will need to check it while it is in ice or take it out and put i... read more