Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KBLC36FTS06

KBLC36FTS06 KitchenAid Refrigerator - Overview

Get Parts and Repair Help for KBLC36FTS06

If you know the refrigerator repair part you need, you can browse the list of all parts on the KBLC36FTS06, or you can search by name or part description. You can also find your part by where it is located on the KBLC36FTS06 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for KBLC36FTS06 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Manuals & Care Guides for KBLC36FTS06

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$74.98

Single Water Filter

The single water filter is a part for your refrigerator. This filter has been updated by the manufacturer and although it may appear different, it will still function the same. The...

$21.04

Cap, Water Filter (Black)

This black cap covers the water filter.

$11.11

Light Rocker Switch

This light rocker light switch is used in a number of household appliances. It is most often found in refrigerators and freezers. This is a simple mechanism that helps turn the lig...

$29.94

Fan Blade

Used with Evaporator Fan Motors.

$3.02

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$5.52

Screw

Sold individually.

$30.64

Thermostat Order 542369 Cement

The ice maker thermostat, also known as the cycling thermostat, controls and regulates the ice maker ejection cycle by monitoring the temperature inside the freezer to determine wh...

$95.74

Ice Mold

This is an ice maker mold and heater assembly for a refrigerator ice maker. It is used with modular style icemakers and is located in the freezer section of the refrigerator. This ice mold is flake resistant which prevents the coating on the mold from flaking into the ice cubes when the ice mold begins to wear. The ice mold forms the ice cubes and the heater allows the ice cubes to fall from the ice mold to drop them into the ice bucket. You will need to remove the ice maker from the refrigerator to access the mold and heater assembly. This is a genuine replacement part.

$4.89

Socket

$3.02

Single Hex Head Screw

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

there were directions

  • Customer: Kate from Jacksonville, FL
  • Difficulty: Very Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 703 of 1175 people found this instruction helpful
We didn't know where the product went and it was very difficult to install. read more

six months the light turns red. time to replace filter

  • Customer: Leroy from Perkiomenville, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 261 of 328 people found this instruction helpful
First I shut the water off to the refrigerator.then i pushed the big button in the middle of the grille below the refrigerator door. pulled out the old filter, took the front cap off the old filter put it on the new filter. took the two red caps off the new filter. pushed the filter in till it locked in place. all done! Turned the back on. read more

Water filter replacement

  • Customer: Victoria from Beaverton, OR
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 118 of 154 people found this instruction helpful
It's simple enough in theory: read the side of the box and follow the instructions. BUT you need to really push the knob in pretty hard (I am a girl, and my hand strength isn't that good). If you don't, when you turn the knob, the filter won't come out, then it's tougher. So: make sure the knob pops before you turn! read more