Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KBFS25EWWH9

KBFS25EWWH9 KitchenAid Refrigerator - Overview

Get Parts and Repair Help for KBFS25EWWH9

If you know the refrigerator repair part you need, you can browse the list of all parts on the KBFS25EWWH9, or you can search by name or part description. You can also find your part by where it is located on the KBFS25EWWH9 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for KBFS25EWWH9 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$26.11

P-Trap Drain Tube Kit

Also known as a duck bill. This kit includes the tube extension piece and spacer.

$23.23

Light Switch

This part turns on the light when the door is opened.

$7.20

Touch-Up Paint - White

18ml

$19.34

Drawer Gear Kit

These parts will attach to your drawer rail and are used to help the drawer glide smoothly.

$11.07

Spray Paint - 12 oz. - White

$6.90

Stainless Steel Cleaner

Use this bottle of stainless steel cleaner and polish for any of your stainless steel appliances.

$99.32

Door Gasket - White

This door gasket is used to make an air-tight seal for the cabinet when the door is closed.

$7.20

Touch-Up Paint - .6fl Ounce - Biscuit

$4.63

Screw

This screw is sold individually

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

light on to order water filter

  • Customer: Douglas from Byron, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 668 of 712 people found this instruction helpful
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute. read more

The poorly designed deli drawer lid tab broke off

  • Customer: Tim from Littleton, CO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 190 of 208 people found this instruction helpful
Removed the fruit & veggie drawers & the deli (pantry) drawer. Took out the 3 screws, removed the attached parts, put them on the replacement part, reattached it and put the drawers back in.

Here's the part I want to share: PartSelect had a expanded diagram showing the correct part and sufficiently detailed to figure out the repair before the pa... read more

Removing the existing filter by rotating as directed and then dislodging from 'docking' station proved difficult. Turns out, the old filter is under a bit of vacuum pressure and getting the unit to separate or release was a challenge.

  • Customer: Jake from Novato, CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 196 of 286 people found this instruction helpful
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady... read more