Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KBFS22EWBL7

KBFS22EWBL7 KitchenAid Refrigerator - Overview

Get Parts and Repair Help for KBFS22EWBL7

If you know the refrigerator repair part you need, you can browse the list of all parts on the KBFS22EWBL7, or you can search by name or part description. You can also find your part by where it is located on the KBFS22EWBL7 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for KBFS22EWBL7 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$71.08

Water Filter

Sold individually. This part has been updated by the manufacturer. It may appear different but will still function the same.

$27.98

Center Crisper Rail - White

This is the center support rail for the refrigerator crisper drawer. This rail supports center of the crisper frame.

$25.99

P-Trap Drain Tube Kit

Also known as a duck bill. This kit includes the tube extension piece and spacer.

$8.88

Ladder Hook

Sold Individually.

$5.05

Screw

Sold individually.

$7.60

Water Filter Bypass Cap

This cap is used when bypassing the filter.

$22.40

Light Switch

This part turns on the light when the door is opened.

$15.47

Fan Blade

Used with Evaporator Fan Motors.

$43.55

Icemaker

This icemaker is an assembly that includes the ice mold and the control device. The icemaker receives water from the water inlet valve and then holds the water into the ice mold until the water is frozen solid. It then ejects the ice and refills until the ice bucket is full.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

light on to order water filter

  • Customer: Douglas from Byron, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 690 of 740 people found this instruction helpful
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute. read more

Removing the existing filter by rotating as directed and then dislodging from 'docking' station proved difficult. Turns out, the old filter is under a bit of vacuum pressure and getting the unit to separate or release was a challenge.

  • Customer: Jake from Novato, CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 197 of 287 people found this instruction helpful
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady... read more

Cracked & Snapped Center Crisper Rail

  • Customer: Ruth from Roxbury, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 128 of 135 people found this instruction helpful
A very easy fix took all of five minutes read more