Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KBFS20EVMS9

KBFS20EVMS9 KitchenAid Refrigerator - Overview

Get Parts and Repair Help for KBFS20EVMS9

If you know the refrigerator repair part you need, you can browse the list of all parts on the KBFS20EVMS9, or you can search by name or part description. You can also find your part by where it is located on the KBFS20EVMS9 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for KBFS20EVMS9 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.60

Light Bulb - 40W

Sold individually.

$74.98

Water Filter

Sold individually. This part has been updated by the manufacturer. It may appear different but will still function the same.

$22.85

Pantry End Cap - Left Side

Sold individually.

$60.39

Crisper Drawer

NOTE: As per the manufacture the crisper drawer has been updated from the original. A new crisper cover may need to be purchased for the drawers to work.

$25.85

P-Trap Drain Tube Kit

Also known as a duck bill. This kit includes the tube extension piece and spacer.

$20.91

Pantry End Cap - Right Side

This part mounts on the wall and is used to support the pantry drawer.

$5.56

Screw

Sold individually.

$34.01

Pantry Drawer Lid

This part helps keep everything inside the drawer, it acts as a cover and also keeps you drawer at the proper temperature by creating a seal.

$22.07

Light Switch

This part turns on the light when the door is opened.

$4.60

Water Filter Bypass Cap

This cap is used when bypassing the filter.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

light on to order water filter

  • Customer: Douglas from Byron, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 735 of 788 people found this instruction helpful
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute. read more

Removing the existing filter by rotating as directed and then dislodging from 'docking' station proved difficult. Turns out, the old filter is under a bit of vacuum pressure and getting the unit to separate or release was a challenge.

  • Customer: Jake from Novato, CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 199 of 289 people found this instruction helpful
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady... read more

Broken pins holding pantry door

  • Customer: Gregory from Bethesda, MD
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 115 of 129 people found this instruction helpful
Removed door and crisper pans.
Removed nuts on left end cap - think there were 3.
Removed nuts on right end cap and one or two on back air regulator attached to right end cap.
Replaced left end cap with new one using reserved nuts.
Carefully removed back air regulator from right end cap.
Attached back air regulator to new right end... read more