This EveryDrop Filter3 is certified to reduce the most contaminants with Triple Filtration Technology. Now, you and your family can enjoy the enriching benefits of cleaner, freshly filtered ice & wate...
This light bulb is a 120 volt, 25 watt incandescent appliance light bulb with a small base screw-in that fits in a variety of appliances such as microwaves, refrigerators, freezers, cooktops, or stove...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate...
This is an ice maker mold and heater assembly for a refrigerator ice maker. It is used with modular style icemakers and is located in the freezer section of the refrigerator. This ice mold is flake re...
The ice maker thermostat, also known as the cycling thermostat, controls and regulates the ice maker ejection cycle by monitoring the temperature inside the freezer to determine when to release the ic...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
August 4, 2021
I have a water build up in the bottom of my freezer in my kitchen aid refrigerator/freezer. It freezes around where it looks like there is a drain in the back of the freeezer, but there is no where for it to drain to subsequently building up and eventually leaks out onto the floor in the front of the freezer section.
For model number KBFC42FTS08
Hi Joe,
Thank you for your question. If you have water pooling at the bottom of your freezer and it is freezing, the drain is clogged with debris and it will need to be cleaned. We hope this helps! If you have any questions, please let us know.
We have this nice kitchen aid built in refrigerator/freezer with a bottom pullout drawer. Water is dripping from the bottom corners of the drawer onto the kitchen floor in front of the unit. Any suggestions as to what the cause might be?
For model number KBFC42FTS08
Hello Daniel, Thank you for your inquiry. It can be caused by the drain tube being clogged, this where the water from the defrost cycle drains into the drain pan at the bottom of the refrigerator. Check the tubes and drain hole/breather valve in the bottom of the refrigerator to see if the line is clogged or frozen. The other part that could cause this issue is the water inlet valve, and check the water tubes for any clogs or leaks. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Can you please help get a replacement for the long plastic piece connected to the door that keeps the door shut? Thank You !!
For model number KBFC42FTS08
Hi Louis, thank you for contacting us. The part that you are looking for is the door gasket. The door gasket for the refrigerator section is part number PS1518643, and the gasket for the freezer section is part number PS11749943. Glad to be of assistance!
First I shut the water off to the refrigerator.then i pushed the big button in the middle of the grille below the refrigerator door. pulled out the old filter, took the front cap off the old filter put it on the new filter. took the two red caps off the new filter. pushed the filter in till it locked in place. all done! Turned the back on
... Read more.
It's simple enough in theory: read the side of the box and follow the instructions. BUT you need to really push the knob in pretty hard (I am a girl, and my hand strength isn't that good). If you don't, when you turn the knob, the filter won't come out, then it's tougher. So: make sure the knob pops before you turn!