This is the replacement charcoal filter for your microwave. It is silver and black in color and measures approximately 10 inches by 2 ½ inches. The charcoal filter removes cooking odors from the air ...
This is a genuine replacement 40 watt bulb for a microwave. The bulb is meant to light up the underside of the microwave or inside of your microwave when the door is open or during use. If your bulb i...
This light socket is for your microwave and is designed to hold the light bulb. If the light bulb is not working, and the bulb has not burned out, it may be a problem with the light socket. This part ...
This turntable tray is for microwaves.
Turntable tray rotates in the center of the microwave to help ensure the food cooks evenly.
Follow the instructions in the owner's manual when installing this part.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Derek
February 22, 2020
How do i access line fuse to change it out
For model number JVM3160RF2SS
Hello Derek,
Thank you for your question. To replace the fuse for this model, first you have to unthread the screws holding in the vent grille on the top. Open your microwave door before doing this as it will give you more access. Once you have removed the front panel, the screws for the control panel should reveal themselves. Unthread those and you should be able to left the panel off and have access to the fuse. Remove the wires attached, then thread the mounting screws from the base of the fuse and remove it, simply replace the fuse and remount it. reapply the panels and the screws and you should now have a working microwave. We hope this helps you.
I’m how do I replace the microwave door Handel? I have the new one already
For model number JVM3160RF2SS
Hi Sue, thank you for reaching out. To replace the door handle of your microwave, please follow the following instructions:
1- Use a putty knife to help pry out the left side of the door trim.
2- You may now use a screwdriver to unthread the mounting screws securing the door handle.
3- Remove the old handle.
4- Install the new handle by positioning it on the door, then mounting screws into the outside holes in the handle.
5- With the handle secure, snap the door trim back into place.
We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Sue
March 3, 2023
When I remove the trim piece to get to the screws to replace the door handle, there is a piece for the trim piece to snap into blocking the screws. How do remove that piece?
For model number JVM3160RF2SS
Hi Sue, thank you for the question. Use a putty knife to pry out the left side of the door trim. Then, using a Phillips head screwdriver, unthread the mounting screws holding the door handle in place and remove the old handle. Install the new door handle by setting it on the door, screwing it into the mounting holes on the outside of the handle, and then replacing the door trim. We hope that helps!
Was this helpful?
Thank you for voting!
Elizabeth
April 26, 2023
Need a replacement screw for surface light door or at least the size I need
For model number JVM3160RF2SS
Hi Elizabeth, thank you for contacting us. According to our research, the compatible screw that attaches to the surface light cover is part number PS222449. If you require assistance to place an order, please contact customer service!
I want to convert to recirculating bent on my micro which was originally installed with a vented line up through my attic. The flap on the top of the micro is not locked down, can i tape it shut or do i need a new part?
For model number JVM3160RF2SS
Hello Mark,
Thank you for your question. You can tape the flap shut to keep it closed if you are converting the microwave to recirculating. We hope this helps.
Open the front cover by pushing it at the top (where it says “Push”), lifting up and pushing back on top edge of the old filter. Pull it out. Installing the new one is basically just the reverse of those steps! That simple.
Old filter did seem to be a little thicker (filter material), but the new one was the exact same dimen
... Read moresions, so it went in properly. Wish the filter material was white, so you knew just how dirty it was actually getting. But... :-D
1. Unplug unit 2. Open door, remove two screws above the top trim piece, slide and remove trim. 3. Remove screw behind control board and top left corner, then release from position. 3b. Unplug all wire terminations and set control panel aside. 4. Remove two screws securing latch board, lift and rotate board
... Read moreout of position, remove three micro switches, xfer monitor switch actuator from lower pin in old board and insert in new. Install new door switches and reverse procedure to complete repair.
Note 1. Take care to located new latch board so holding tabs line up, pass through frame, and openings for door tangs line up with openings in frame before securing with screws.