There are two different couplers (also known as a turntable shaft) that can be used for this tray - a male D-shaped shaft and a female D-shaped shaft. The couplers are sold separately.
$106.43
In Stock
Order within the next 4 hrs and your part ships today!
The stirrer fan cover in your microwave can be found on the roof of the microwave. It protects the fan from damage and debris. This fan cover is made of white plastic and is approximately 7.5 inches i...
$21.48
In Stock
Order within the next 4 hrs and your part ships today!
This is the replacement damper bracket for your microwave. It is made of plastic and is approximately 11 inches wide and 3 inches long. The damper bracket attaches to the outer cabinet and directs air...
$8.56
In Stock
Order within the next 4 hrs and your part ships today!
This part is the replacement high-voltage diode for your microwave. It is approximately 3 inches long and is sold individually. The high voltage diode is an electrical current control device inside yo...
$8.56
In Stock
Order within the next 4 hrs and your part ships today!
This is the replacement monitor switch for your microwave. It is black in color and measures approximately 1 inch by ¾ of an inch. This switch monitors the door latch position of your microwave and co...
$24.84
In Stock
Order within the next 4 hrs and your part ships today!
This part is the replacement plastic rivet, or stirrer fan cover clip for your microwave. It is made of white plastic and is approximately ¼ inch in diameter, and ½ inch long. The plastic rivet holds ...
$9.51
In Stock
Order within the next 4 hrs and your part ships today!
This charcoal filter is a genuine OEM replacement part that is compatible with various models of microwave. It has a length of approximately 8 inches by 5 inches. The filter is designed to absorb odor...
$12.50
In Stock
Order within the next 4 hrs and your part ships today!
This grease filter is a genuine OEM replacement part that is compatible with various models of microwave. It has dimensions of 7.5 inches by 5 inches and it is made of durable aluminum mesh material. ...
$8.56
In Stock
Order within the next 4 hrs and your part ships today!
This fan blade, also known as a stirrer blade, is a genuine OEM replacement part for your microwave. This is a fairly easy repair. To complete it, you will need a screwdriver to disassemble the fan as...
Order within the next 4 hrs and your part ships today!
Questions And Answers for JVM3160DF8WW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bob
December 19, 2023
The number lamp is blinking. Need net lamp assembly
For model number JVM3160DF8WW
Hi Bob,
Thank you for your question. If the number lights on the control panel are blinking, you will likely need to replace the electronic control board. The part number for the electronic control board is PS12299300. We hope this helps!
My GE microwave, model number JVM3160DF8WW does not beep when buttons are pushed or the cycle ends
For model number JVM3160DF8WW
Hi Blake, thank you for getting in touch. Press and hold "0" for 3 seconds to turn the sound on and off. We hope this information is useful!
Was this helpful?
Thank you for voting!
Pauline
April 29, 2024
The microwave makes noise when it goes around. Could it be the wheels and roller?
For model number JVM3160DF8WW
Hi Pauline, thank you for getting in touch. Based on our understanding of the issue, we would suggest checking the turntable assembly for any damages. If this is not the issue, we would recommend replacing the motor, part number PS2355837, to solve the problem. Glad to be of assistance!
Why are the display numbers blinking and/or missing?
For model number JVM3160DF8WW
Hello Brian, thank you for the question. This issue is caused due to the faulty control panel, part number PS16542321. We would recommend replacing it to fix the issue. Good luck with the repair!
Why doesn't the unit work at all..everything works on my end i.e. electric works..no fuse tripped..plugged in
For model number JVM3160DF8WW
Hi Mark, thank you for the question. Based on our research, the issue is most probably with the line fuse. We would suggest replacing the line fuse, part number PS11773885, to solve the problem. It protects the microwave from damage by shutting off the microwave if there is a power surge. We hope that helps!
Remove microwave outer cover. Turn on side & locate the upper & lower door switches. Better to replace in pairs even if one is ok. Remove the wire harness to each switch. Then replace switch and re connect the wire harness. Re attach outer cover and test to see if that solved the problem. If so then well done!!
First I disconnected the power and opened the door. Then I removed the top screws holding the top vent louvers, then removed the screw at the top of the touch pad. The touch pad removes by sliding up slightly then tilting top out. I unscrewed two screws holding the door latch assembly. Press the tab to remove and replace switch. Reco
... Read morennect wires, reseat latch mount by placing top bracket tab in place first, allign and secure with screws. Reseat touch pad by placing bottom tabs in first, tilt forward and press up to seat top tabs, secure with top screw. Secure vent louver screws, plug in and watch your microwave work again.
I followed the generic trouble shooting directions on the web site. It suggested either diode, capacitor and/or magnetron. I test each. All tested OK except diode. It was supposed to measure open in one direction and appox 200k ohms in the other direction. My diode measured open in both directions (tried multiple times, multiple sett
... Read moreings). I replaced the diode. The order process was great and it shipped immediately. I knew I was in trouble when I measured the new diode and it too was open in both directions. It was easy to install but unfortunately no joy - did not solve the problem. At this point it is likely cheaper just to buy a new one