Models > JVM1870WF07

JVM1870WF07 General Electric Microwave - Overview

Get Parts and Repair Help for JVM1870WF07

If you know the microwave repair part you need, you can browse the list of all parts on the JVM1870WF07, or you can search by name or part description. You can also find your part by where it is located on the JVM1870WF07 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. We’ve also included any installation videos we have for JVM1870WF07 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the JVM1870WF07 [Viewing 1 of 1]

$5.43

Halogen Light Bulb - 120V 20W

Sold individually.

$6.62

FUSE

$19.43

Secondary Door Switch

$8.54

Glass Light Lens

$8.54

Glass Turntable Coupler

This part accepts a D-shaped motor shaft.

$36.67

Grease Filter

This metallic vent hood filter collects grease particles in the air from cooking. Sold individually.

$80.49

Glass Cooking Tray

$17.73

Monitor Door Switch

$5.77

Rack Holder

Sold individually.

$34.18

Charcoal Filter

NOTE: The charcoal filter cannot be cleaned. It must be replaced. This metallic vent hood filter collects grease particles in the air from cooking.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave completely stopped working

  • Customer: Kim from Cliffside Park NJ
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 332 of 437 people found this instruction helpful
Turned out the issue was easily solved by replacing a single, inexpensive fuse.

First off, UNPLUG THE MICROWAVE.

The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove an... read more

Lens cracked and bulbs burned out

  • Customer: Mark from GRAND BLANC MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 111 of 147 people found this instruction helpful
First I removed the single screw holding the lens assembly in place. Then I lowered the assembly and tilted it until it came out. To remove the existing cracked glass lens there were four tabs bent down on it. By hand I lifted each tab just enough to remove the broken lens. I then replaced the broken lens with the new one and re-bent the tabs down by han... read more

light worked, timer and control pad worked, but no turntable, no heat, no noises of any sort, just didn't start up

  • Customer: Marla from Arlington TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 93 of 113 people found this instruction helpful
Noted on partselect.com that someone else with this problem, found it to be secondary door switch. There are three door switches in this model, but online info noted that one of the three might feel "soft" (in my case, one switch clicked in a rather "jiggly" way, the other two were strong decisive clicks.) To access the door switches on this model was the ... read more