Models > JVM1339WW02 > Instructions

JVM1339WW02 General Electric Microwave - Instructions

All installation instructions for JVM1339WW02 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the microwave repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the JVM1339WW02
76-90 of 231
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

microwave would not start

  • Customer: JULIA from JACKSONVILLE FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 3 of 7 people found this instruction helpful
took of cover removed switch and replaced with new one

Broken light socket

  • Customer: Richard from Batavia OH
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 4 people found this instruction helpful
Turned the power to the unit off. Removed seven- (7) small screws from the base plate, not removing the rear screws. The plate dropped a few inches allowing me to get to the light socket.

I removed one- (1) screw that allowed the socket to be removed. I then detached the two- (2) electrical leads. I now installed the new socket, replacing the leads and the screw along with a new bulb. I pushed the bottom plate back into the up position and replaced the seven- (7) screws.

Turned the power back on and we were good to go.

The handle broke off of the microwave.

  • Customer: Mary Rose from River Forest IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 4 people found this instruction helpful
I loosened the screw that held the top of the handle onto the door of the microwave, and also removed the gasket on the inside of the door, exposing the bottom screw holding the lower end of the handle to the door. I removed the old handle parts and placed the new handle in the proper location, and then screwed the handle into place. I replaced the gasket, and I was done!
It was painless.

replace broken door handle

  • Customer: Leslie from Darien CT
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
removed visble screw. Then lifted the inside door rim around the glass to reveal the hidden screw. Removed that screw and replaced broken handle with new handle and screwed it in place. Replace part of rim that was lifted to reveal the hidden screw.

broken handle on microwave door

  • Customer: Harry from Tallahassee FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
Removed the spline around the inside of the door with the flat head screwdriver. Removed the 2 screws holding the broken handle with the phillips screwdriver. . Installed the new handle. Replaced the spline. Job done

Original door handle broke off

  • Customer: widmark from wellington FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
I read some of the previous blogs on same problem. Followed same steps others took before me and I was done in 5 minutes! Opened the microwave door. Removed the top screw that was visible and then removed the ring around inside door frame by using a simple butter knife to get it going carefully. Removed the hidden screw on bottom of door . Replaced Handle, screwed in top and bottom , attached plastic seal around door by snapping it back in place. Done

Broken Handle Replacement

  • Customer: James from The Woodlands TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
Opened door removed exposed screw inside the microwave door. Partially pryed out plastic liner and removed the second screw. Put new handle in place and replaced both screws. Pressed plastic liner back in place. 1-2-3 easy as pie.

door handle broken

  • Customer: Jai from Denville NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
First I removed the top screw which is visible when you open the door. Other screw is hidded under the plastic lining (don't know exact part name). I removed the lining with knitchen knife and unscrew the other screw also. And put the new handle in place.

The bottom portion of the door handle became detached from the door

  • Customer: Rahul from Irvine CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
1 - Open the microwave door and locate the plastic gasket that goes all around the inside of the door (just around the glass)
2 - Using a slotted screwdriver, remove the plastic gasket. This will expose the bottom screw.
3 - Remove the top and bottom screws of the handle
4 - Attach the new handle and put the plastic gasket back in place
5 - Enjoy the rest of your day!

The microwave door handle broke

  • Customer: Kenneth from Caledonia MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
The repair is simple. There was only one screw remaining to hold the handle and the screw is visible from the inside of the door. The second screw can be accessed by removing a piece of trim that goes around the inside of the glass. Remove that trim by carefully twisting the trim and sliding a thin knife into the inner edge. Once you see the first of the small clips the rest is easy.

Only complaint is that the microwave is only 10 years old and the part has two small extrusions for the screw. The price of the replacement is excessively high for what it is.

Door handle broke off

  • Customer: Paul from Pembroke Pines FL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
Remove upper handle screw. This is accessible on the inside surface of the door.

Remove inside trim piece that surrounds door glass. It prys off easily.

With trim off, lower screw is accessible. Remove lower screw.

Align new door handle with holes in door and replace screws.

Replace inside door trim (just snaps in place).

The old handle had broken. DESIGN FLAW WITH GE MICROWAVES. I have replaced them on 3 different ovens!

  • Customer: John from Titusville FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
Thankfully I read someone else's report. I remove the top screw with ease and then pried off the cover surronding the glass panel enough to get access to the lower screw and removed it. Then I just screwed the screws back into the new handle and snapped the plastic covering back in place and "Bob's your uncle"

Broken lens

  • Customer: Norman from Voorheesville NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
remove two screws bend out flaps remove broken glass install new glas bend flaps back to hold glass install two screws. Done.

old handle broken beyond repair

  • Customer: francis from palm coast FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
Piece of cake. Removed plastic band on door to expose second screw. Loosened screws and attached new handle per comments on your website

Previoous glass lens was broken

  • Customer: Tommy from Santa clarita CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
This repair was easy and could be done by anyone. If you undertake to do this replacement, remember to slowly bend the medal tabs back that hold the lens. Handled roughly these tabs could break off.

This repair can be don in under 5 minutes, easily !!
All Instructions for the JVM1339WW02
76-90 of 231